John Y. Hung

Journal Publications
Conference Publications

JOURNAL PUBLICATIONS

  1. P. Pan, T. McDonald, J. Fulton, B. Via, and J. Y. Hung, "Simultaneous moisture content and mass flow measurements in wood chip flows using coupled dielectric and impact sensors," Sensors (MDPI), vol 17, no. 20, pgs. 11, December 2016.
  2. C. Li, H. Yang, L. L. Jenkins, R. N. Dean, G. T. Flowers, and J. Y. Hung, "Enhanced- performance control of an electromagnetic solenoid system using a digital controller," IEEE Transactions on Control Systems Technology, vol. 24, no. 5, pgs. 7, September 2016.
  3. C. Li, R. N. Dean, J. Y. Hung, and G. T. Flowers, "Feedback posicast control of micro- machined electrostatic actuators," IE Micro & Nano Letters, pgs. 5 pp., July 2016.
  4. P. Pan, T. McDonald, B. Via, J. Fulton, and J. Y. Hung, "Predicting moisture content of chipped pine samples with a multi-electrode capacitance sensor," Biosystems Engineering, 2015.
  5. S. He, J. Y. Hung, and R. M. Nelms, "Small signal modeling of I2 average current mode control," IEEE Transactions on Power Electronics, vol. 31, no. 5, pp. 3849-3858, 2015.
  6. J. M. Wooten, D. M. Bevly, and J. Y. Hung, "Piezoelectric polymer-based collision detection sensor for robotic applications," Electronics (MPDI), no. 4, pp. 204-221, 2015.
  7. C. Li, R. N. Dean, G. T. Flowers, and J. Y. Hung, "Nonlinear feedback control to enhance stable performance of micromachined electrostatic parallel plate actuators," International Journal of Automation and Power Engineering (IJAPE), vol. 3, no. 1, pp. 49-52, January 2014.
  8. E. A. Gonzalez, J. Y. Hung, L. Dorcak, J. Terpak, and I. Petras, "Posicast control of a class of fractional-order processes," Central European Journal of Physics, vol. 11, no. 6, pp. 868-880, June 2013.
  9. K. Nyugen-Duy, T.-H. Liu, D. F. Chen, and J. Y. Hung, "Improvement of matrix converter drive reliability by online fault detection and a fault-tolerant switching strategy," IEEE Trans- actions on Industrial Electronics, vol. 59, no. 1, pp. 244-256, January 2012.
  10. L. Guo, J. Y. Hung, and R. Nelms, "Comparative evaluation of sliding mode fuzzy controller and PID controller for a boost converter," Electric Power Systems Research, vol. 81, no. 1, pp. 99-106, Jan 2011.
  11. M. Liserre, T. Sauter, and J. Y. Hung, "Future energy systems: Integrating renewable energy sources into the smart power grid through industrial electronics," IEEE Industrial Electronics Magazine, vol. 4, no. 1, pp. 18-37, March 2010. (Best Paper Award for 2010 IEEE Industrial Electronics Magazine)
  12. L. Guo, J. Y. Hung, and R. M. Nelms, "Evaluation of DSP-based PID and fuzzy controllers for dc-dc converters," IEEE Transactions on Industrial Electronics, vol. 56, no. 6, pp. 2237-2248, June 2009.
  13. M. Lashley, D. M. Bevly, and J. Y. Hung, "Vector tracking algorithms for weak GPS signals in high dynamics," IEEE Journal of Selected Topics in Signal Processing, vol. 3, no. 4, pp. 661-673, August 2009.
  14. L. Márton, A. S. Hodel, B. Lantos, and J. Y. Hung, "Underactuated robot control: Comparing LQR, subspace stabilization, and combined error metric approaches," IEEE Transactions on Industrial Electronics, vol. 55, no. 10, pp. 3724-3730, October 2008.
  15. J. J. Rodriguez-Andina and J. Y. Hung, "Guest editorial: Special Section on the 2007 IEEE International Symposium on Industrial Electronics," IEEE Transactions on Industrial Electronics, vol. 55, no. 9, pp. 3178-3179, September 2008.
  16. R. N. Dean , G. Flowers , R. Horvath , N. Sanders , A. S. Hodel , J. Y. Hung, and T. A. Roppel, "Characterization and experimental verification of the nonlinear distortion in a technique for measuring the relative velocity between micromachined structures in normal translational motion," IEEE Sensors Journal, vol. 7, no. 4, pp. 496-561, April 2007.
  17. J. Y. Hung, "Posicast control - Past and present," IEEE Multidisciplinary Engineering Education Magazine, vol. 2, no. 1, pp. 7-11, March 2007.
  18. W. G. Foshee, III, H. Kirkici, J. Y. Hung, E. K. Blythe, A. Goel, and G. R. Wehtje, "Seedling emergence of smallflower morningglory and green foxtail subjected to a pulsed electric field," International Journal of Vegetable Science, vol. 13, no. 1, pp. 61-72, 2007.
  19. Q. Feng, R. M. Nelms, and J. Y. Hung, "Posicast-based digital control of the buck converter," IEEE Transactions on Industrial Electronics, vol. 53, no. 3, pp. 759-767, June 2006.
  20. M. Long, C.-H. Wu, and J. Y. Hung, "Security models of network-based control systems: Denial of service attacks and counter measures," IEEE Transactions on Industrial Informatics, vol. 1, no. 2, pp. 85-96, May 2005.
  21. S. T. Hung and J. Y. Hung, "Guest Editorial: Special Section on Automotive Electronic Systems," IEEE Transactions on Industrial Electronics, vol. 51, no. 2, April 2004, pp. 254-256.
  22. M. Parmar and J. Y. Hung, "Sensorless optimal controller design for an electric power assist steering system," IEEE Transactions on Industrial Electronics: Special Section on Automotive Electronic Systems, vol. 51, no. 2, April 2004, pp. 290-298.
  23. J. Y. Hung, N. G. Albritton, and F. Xia, "Nonlinear control of a magnetic bearing system," Mechatronics, vol. 13, no. 6, July 2003, pp. 621-637. (Second Place, 2002-2003 Technical Paper Competition, IEEE Alabama Section.)
  24. J. Y. Hung, "Feedback control with Posicast," IEEE Transactions on Industrial Electronics, vol. 50, no. 1, Feb 2003, pp. 94-99.
  25. J. Y. Hung, "Sensitivity points identification: Tutorial and experiment," IEEE Transactions on Industrial Electronics, vol. 48, no. 6, Dec 2001, pp. 1043-1047.
  26. K-K. Shyu, C-K.Lai, and J. Y. Hung, "Totally invariant state feedback controller for position control of synchronous reluctance motor," IEEE Transactions on Industrial Electronics, vol. 48, no. 3, June 2001, pp. 615-624.
  27. T. Roppel, J. Y. Hung, S. M. Wentworth, and A. S. Hodel, "An interdisciplinary laboratory sequence in electrical and computer engineering: Curriculum design and assessment results," IEEE Transactions on Education, Special Issue on Assessment, vol. 43, no. 2, May 2000, pp. 143-152.
  28. T. Gupta, R. R. Boudreaux, R. M. Nelms, and J. Y. Hung, "Implementation of a fuzzy controller for dc-dc converters using an inexpensive 8-bit microcontroller," IEEE Transactions on Industrial Electronics, vol. 44, no. 6, Oct 1997, pp. 661-669. (BEST PAPER AWARD 1996, IEEE Transactions on Industrial Electronics)
  29. C. Peter Cho, B. K. Fussel, and J. Y. Hung, "A novel integrated electric motor/pump for underwater applications," AIP Journal of Applied Physics, vol. 79, no. 8, April 1996.
  30. J. Y. Hung, "Guest editorial: Special section on micromachine research," IEEE Transactions on Industrial Electronics, vol. 42, no. 5, Oct 1995, pp. 421-422.
  31. J. Y. Hung, "Magnetic bearing control using fuzzy logic," IEEE Transactions on Industry Applications, vol. 31, no. 6, Nov/Dec 1995, pp. 1492-1497.
  32. J. Y. Hung, "Torque ripple minimization for variable reluctance motors," Mechatronics, vol. 4, no. 8, Dec 1994, pp. 785-798.
  33. J. Y. Hung, R. Nelms, and P. Stevenson, "An output feedback sliding mode speed regulator for dc drives," IEEE Transactions on Industry Applications, vol. 30, no. 3, May/June 1994, pp. 691-698.
  34. J. Y. Hung, "Design of the most efficient excitation for a class of electric motor," IEEE Transactions on Circuits and Systems- I: Fundamental Theory and Applications, vol. 41, no. 4, Apr 1994, pp. 341-344.
  35. J. Y. Hung and R. B. Tilove, "Guest Editorial: Special Section on Industrial Robotics," IEEE Transactions on Industrial Electronics, vol. 41, no.1, Feb 1994, pp. 1-3.
  36. C. P. Cho , B. Fussel, and J. Y. Hung, "Detent torque and axial force effects in a dual air-gap axial-field brushless motor," IEEE Transactions on Magnetics, vol. 29, no. 6, Nov 1993, pp. 2416-2418.
  37. J. Y. Hung and Z. Ding, "Design of currents to reduce torque ripple in brushless dc motors," IEE Proceedings, Part B: Electric Power Applications, vol. 140, no. 4, July 1993, pp. 260-266.
  38. J. Y. Hung, W. B. Gao, and J. C. Hung, "Variable structure control: A survey," IEEE Transactions on Industrial Electronics, vol. 40, no. 1, Feb 1993, pp. 2-22.
  39. J. Y. Hung and H. V. White, "Precision winding of fiber optic filament-Part II: Winding control," IEEE Transactions on Industrial Electronics, vol. 39, no. 4, Aug 1992, pp. 313-322.
  40. J. Y. Hung and H. V. White, "Precision winding of fiber optic filament-Part I: Winding characteristics," IEEE Transactions on Industrial Electronics, vol. 39, no. 3, June 1992, pp. 258-267.
  41. J. Y. Hung, "Control of industrial robots that have transmission elasticity," IEEE Transactions on Industrial Electronics, vol. 38, no. 6, Dec 1991, pp. 421-427.
  42. F. Ghorbel, J. Y. Hung, and M. W. Spong, "Adaptive control of flexible joint manipulators," IEEE Control Systems Magazine, vol. 9, no. 7, Dec 1989, pp. 9-13.

CONFERENCE PUBLICATIONS

  1. J. Jiao, J. Y. Hung, and R. M. Nelms, "State feedback control for single-phase grid-connected inverter under weak grid," 26th IEEE International Symposium on Industrial Electronics (ISIE-2017), Edinburgh, SCOTLAND, 19-21 June 2017, pgs. 7.
  2. J. Jiao, J. Y. Hung, and R. M. Nelms, "Gain scheduling control strategy for a single-phase grid-connected inverter," 26th IEEE International Symposium on Industrial Electronics (ISIE-2017), Edinburgh, SCOTLAND, 19-21 June 2017, pgs. 7.
  3. T. Wu and J. Y. Hung, "Tractor-trailer path tracking using steering rate control," 26th IEEE International Symposium on Industrial Electronics (ISIE-2017), Edinburgh, SCOTLAND, 19-21 June 2017, pgs. 6.
  4. T. Wu and J. Y. Hung, "Lateral position control for a tractor-trailer system using coordinate transformation and hybrid controllers," 2017 IEEE SoutheastCon, Charlotte, NC, 30 Mar - 2 Apr 2017, pgs. 6.
  5. T. Wu and J. Y. Hung, "State estimation for a tractor-trailer system using adaptive unscented Kalman filter," 2017 IEEE SoutheastCon, Charlotte, NC, 30 Mar - 2 Apr 2017, pgs. 6.
  6. T. Wu and J. Y. Hung, "Path following for a tractor-trailer system using model predictive control," 2017 IEEE SoutheastCon, Charlotte, NC, 30 Mar - 2 Apr 2017.
  7. X. Yu and J. Y. Hung, "Coverage path planning based on a multiple sweep line decomposition," , Yokohama, JAPAN, 9-12 November 2015, pgs. 6.
  8. X. Yu, T. A. Roppel, and J. Y. Hung, "An optimization approach of field coverage planning," 41st Annual Conference of the IEEE Industrial Electronics Society (IECON-2015), Yokohama, JAPAN, 9-12 November 2015, pgs. 6.
  9. C. Piao and J. Y. Hung, "Analysis and compensation of dead-time effect in direct matrix converters," 2015 IEEE International Conference on Technologies for Sustainability (SusTech-2015), Ogden, Utah, July 2015.
  10. C. Piao and J. Y. Hung, "A novel simplified control strategy to balance dc-link capacitor voltages for multi-level diode clamped VSI based on simplified SVPWM," 2015 IEEE International Symposium on Industrial Electronics (ISIE-2015), Buzios, Rio de Janeiro, BRAZIL, June 2015, pgs. 6.
  11. C. Piao and J. Y. Hung, "Analysis and compensation of dead-time effect in multilevel diode clamped VSI based on simplified SVPWM," 10th IEEE International Conference on Industrial Electronics and Applications (ICIEA-2015), Auckland, New Zealand, 15-17 June 2015.
  12. C. Piao and J. Y. Hung, "A novel SVPWM overmodulation technique for three-level neutral point clamped voltage source inverter," 2015 IEEE Transportation Electrification Conference and Expo (ITEC-2015), Detroit, MI, 14-17 June 2015.
  13. C. Piao and J. Y. Hung, "A unified carrier-based modulation method for direct matrix converter," 2015 IEEE International Conference on Electro/Information Technology (EIT-2015), DeKalb, IL, 21-23 May 2015, pp. 122-128.
  14. C. Piao and J. Y. Hung, "A carrier-based discontinuous space vector modulation for three-level NPC inverter," 2015 International Workshop on Integrated Power Packaging (IWIPP-2015), Chicago, IL, 3-6 May 2015, pp. 75-78.
  15. C. Piao and J. Y. Hung, "A simplified space vector PWM algorithm for three-level neutral point clamped VSI," 32nd IEEE SoutheastCon, Ft. Lauderdale, FL, 9-12 April 2015.
  16. C. Piao and J. Y. Hung, "A simplified and unified space vector PWM algorithm for multilevel diode clamped VSI," 16th IEEE International Conference on Industrial Technology, Seville, SPAIN, 17-19 March 2015.
  17. S. He, J. Y. Hung, and R. M. Nelms, "A digital predictive current mode controller using average inductor current," 2014 IEEE Energy Conversion Congress and Exposition (ECCE-2014), Pittsburgh, PA, September 14-18 2014.
  18. C. Li, R. N. Dean, G. T. Flowers, and J. Y. Hung, "Nonlinear feedback control to enhance stable performance of micromachined electrostatic parallel plate actuators," 4th International Conference on Electrical and Control Engineering (ICECE-2014), Indianapolis, IN, 10-11 January 2014, pgs. 4.
  19. J. M. Wooten, D. M. Bevly, and J. Y. Hung, "Robust large-area piezoelectric polymer based collision detection sensor," 39th Annual Conference of the IEEE Industrial Electronics Society (IECON-2013), Vienna, AUSTRIA, 10-13 November 2013, pp. 3994-3999.
  20. J. Salmon, D. M. Bevly, and J. Y. Hung, "Guidance of a robotic off-road tractor-trailer system using model predictive control," 6th Annual ASME Dynamic Systems and Control Conference (DSCC-2013), Palo Alto, CA, October 21-23 2013.
  21. C. G. Wilson, J. Y. Hung, and R. N. Dean, "A sliding mode controller for two-phase synchronous buck converters," 38th Annual Conference of the IEEE Industrial Electronics Society (IECON-2012), Montreal, Quebec, CANADA, 25-28 October 2012.
  22. A. Singh, J. Y. Hung, and B. J. Selfridge, "A hybrid backstepping-like nonlinear control of a robot-trailer system," 38th Annual Conference of the IEEE Industrial Electronics Society (IECON-2012), Montreal, Quebec, CANADA, 25-28 October 2012, pgs. 5.
  23. M. L. Payne, J. Y. Hung, D. M. Bevly, and B. J. Selfridge, "Control of a robot-trailer system using a single non-collocated sensor," 38th Annual Conference of the IEEE Industrial Electronics Society (IECON-2012), Montreal, Quebec, CANADA, 25-28 October 2012.
  24. X. Yu and J. Y. Hung, "Optimal path planning for an autonomous robot-trailer system," 38th Annual Conference of the IEEE Industrial Electronics Society (IECON-2012), Montreal, Quebec, CANADA, 25-28 October 2012, pgs. 6.
  25. V. P. Nelson and J. Y. Hung, "Structuring a system design laboratory course to facilitate outcomes assessment," 119th ASEE Annual Conference & Exposition, San Antonio, TX: American Society for Engineering Education, 10-13 June 2012.
  26. J. Y. Hung, V. P. Nelson, C. S. Cole, and A. Wong, "Instrumentation for embedded control systems design: Incorporating the Digilent Electronics Explorer board," 119th ASEE Annual Conference & Exposition, San Antonio, TX: American Society for Engineering Education, 10-13 June 2012.
  27. X. Yu and J. Y. Hung, "A genetic algorithm for the Dubins traveling salesman problem," 2012 IEEE International Symposium on Industrial Electronics (ISIE-2012), Hangzhou, China, 28-31 May 2012.
  28. B. L. Eidson, J. Y. Hung, and R. M. Nelms, "An experimental evaluation of the delta operator representation of the PID controller," 2012 IEEE SoutheastCon, Orlando, FL, 15-18 March 2012.
  29. J. Britt, D. J. Broderick, D. M. Bevly, and J. Y. Hung, "Dynamic testing and calibration of gaussian processes for vehicle attitude estimation," 10th International Conference on Machine Learning and Applications and Workshops (ICMLA-2011), vol. 1, Honolulu, HI, December 2011, pp. 124-128.
  30. R. N. Dean, C. G. Wilson, J. P. Brunsch, and J. Y. Hung, "A synthetic voltage division controller to extend the stable operating range of parallel plate actuators," 2011 IEEE Multi-Conference on Systems and Control, Denver, CO, 28-30 September 2011.
  31. D. J. Broderick, J. Britt, J. Ryan, D. M. Bevly, and J. Y. Hung, "Simple calibration for vehicle pose estimation using Gaussian processes," Institute of Navigation (ION) 2011 International Technical Meeting (ITM), San Diego, CA, Jan 2011.
  32. C.G.Wilson and J.Y.Hung, "A system simulation technique combining SPICE and SIMULINK tools," 36th Annual Conference of the IEEE Industrial Electronics Society (IECON-2010), Glendale, AZ, 7-10 November 2010.
  33. D. W. Hodo, D. M. Bevly, J. Y. Hung, S. Millhouse, and B. Selfridge, "Optimal path planning with obstacle avoidance for autonomous surveying," 36th Annual Conference of the IEEE Industrial Electronics Society (IECON-2010), Glendale, AZ, 7-10 November 2010.
  34. C. G. Wilson, R. N. Dean, G. Flowers, and J. Y. Hung, "A technique for embedding SPICE in SIMULINK environment for MEMS simulations," 2010 ASME International Mechanical Engineering Congress & Exposition, Vancouver, BC, 12-18 November 2010.
  35. D. J. Broderick, D. M. Bevly, and J. Y. Hung, "Modeling vehicle lateral dynamics by Gaussian processes," 2010 ASME Dynamic Systems and Control Conference, Boston, MA, 13-15 September 2010.
  36. M. Lashley, D. M. Bevly, and J. Y. Hung, "Analysis of deeply integrated and tightly coupled architectures," 2010 IEEE/ION Position Location and Navigation System (PLANS) Conference, Palm Springs, CA, 3-6 May 2010.
  37. M. Lashley, D. M. Bevly, and J. Y. Hung, "A valid comparison of vector and scalar tracking loops," 2010 IEEE/ION Position Location and Navigation System (PLANS) Conference, Palm Springs, CA, 3-6 May 2010.
  38. J. Britt, D. J. Broderick, D. M. Bevly, and J. Y. Hung, "LiDAR attitude estimation for vehicle safety systems," 2010 IEEE/ION Position Location and Navigation Symposium (PLANS), Palm Springs, CA, May 2010.
  39. D. J. Broderick, D. M. Bevly, and J. Y. Hung, "An adaptive nonlinear state estimator for vehicle lateral dynamics," 35th Annual Conference of the IEEE Industrial Electronics Society (IECON-2009), Porto, PORTUGAL, November 3-5 2009.
  40. L. Ramadoss and J. Y. Hung, "A study on universal serial bus (USB) latency," 34th Annual Conference of the IEEE Industrial Electronics Society (IECON-2008), Orlando, FL, 10-12 November 2008.
  41. W. Travis, D. W. Hodo, D. M. Bevly, and J. Y. Hung, "UGV trailer position estimation using a dynamic base RTK system," 2008 AIAA Guidance, Navigation, and Control Conference, Honolulu, HI, 18-21 August 2008, pp. AIAA-2008-7442.
  42. M. Lashley, D. M. Bevly, and J. Y. Hung, "Impact of carrier to noise power density, platform dynamics, and IMU quality on deeply integrated navigation," 2008 IEEE/ION Position Location and Navigation Symposium, Monterey, CA, 5-8 May 2008, pgs. 8.
  43. J. Y. Hung, "Integrating alternative energy sources: Opportunities for industrial electronics," AIE Expo 2007: Primer Congreso Internacional de la Industria Eléctrica y Electrónica, Santiago, CHILE, 24-26 October 2007.
  44. D. W. Hodo, J. Y. Hung, D. M. Bevly, and D. S. Millhouse, "Analysis of trailer position error in an autonomous robot-trailer system with sensor noise," 2007 IEEE International Symposium on Industrial Electronics (ISIE-2007), Vigo, Spain, June 4-7 2007.
  45. D. W. Hodo, J. Y. Hung, D. M. Bevly, and D. S. Millhouse, "Effects of sensor placement and errors on path following control of a mobile robot-trailer system," 2007 American Control Conference (ACC-2007), New York, NY, July 11-13 2007.
  46. J. E. Rogers, P. M. Ozmun, J. Y. Hung, and R. N. Dean, "Bi-directional gap closing MEMS actuator using timing and control techniques," 32nd Annual Conference of IEEE Industrial Electronics Society (IECON-2006), Paris, FRANCE, November 7-10, 2006, pp. 3149-3154.
  47. D. J. Broderick and J. Y. Hung, "Feedback linearization of an electrostatic actuator by particle swarm optimization," 2006 IEEE International Symposium on Industrial Electronics (ISIE-2006), Montreal, Quebec, CANADA, July 10-13, 2006.
  48. M. Lashley, J. Y. Hung, D. Lawrence, and L. Lowe, "Split-gate tracking accuracy for phase coded CW radar," Proceedings of 2006 IEEE Radar Conference, Verona, NY: IEEE Aerospace & Electronics Society, April 24-27, 2006.
  49. R. N. Dean, J. Y. Hung, and B. M. Wilamowski, "Advanced controllers for microelectromechanical actuators," 2005 IEEE International Conference on Industrial Technology (ICIT-2005), Kowloon, HONG KONG, December 2005.
  50. N. B. Loden and J. Y. Hung, "An adaptive PID controller for network based control systems," 31st Annual Conference of the IEEE Industrial Electronics Society (IECON-2005), Raleigh, NC, November 2005.
  51. L. Guo, R. M. Nelms, and J. Y. Hung, "Comparative evaluation of linear PID and fuzzy control for a boost converter," 31st Annual Conference of the IEEE Industrial Electronics Society (IECON-2005), Raleigh, NC, November 2005.
  52. C. W. Smith, R. L. Raper, and J. Y. Hung, "Controller design for the OMIS (on-the-fly mechanical impedance sensor)," Proceedings of 2005 ASAE Annual International Meeting, Tampa, FL: American Society of Agricultural Engineers, July 2005.
  53. L. Guo, J. Y. Hung, and R. M. Nelms, "Experimental evaluation of a fuzzy controller using a parallel integrator structure," 2005 IEEE International Symposium on Industrial Electronics (ISIE-2005), Dubrovnik, CROATIA, June 2005.
  54. A. T. Simmons, J. Y. Hung, and A. S. Hodel, "Hybrid improvement of classical nonlinear control," 2005 IEEE International Symposium on Industrial Electronics (ISIE-2005), Dubrovnik, CROATIA, June 2005.
  55. B. M. Wilamowski, J. Y. Hung, and R. Gottiparthy, "Digitally tuned analog VLSI controllers," 2005 IEEE International Symposium on Industrial Electronics (ISIE-2005), Dubrovnik, CROATIA, June 2005.
  56. M. Long, C-H. Wu, J. Y. Hung and J. D. Irwin, "Two network security models for analyzing network-based control systems under denial of service attacks," 30th Annual Conference of IEEE Industrial Electronics Society (IECON-2004), Busan, KOREA, November 2-6, 2004.
  57. A. T. Simmons and J. Y. Hung, Hybrid control of nonlinear systems with uncertain relative degree: Ball-on-beam example," 30th Annual Conference of IEEE Industrial Electronics Society (IECON-2004), Busan, KOREA, November 2-6, 2004.
  58. J. Y. Hung, "An output feedback controller with reduced sensitivity to sensor quantization," 2004 IEEE International Symposium on Industrial Electronics (ISIE-2004), Ajaccio, Corsica, FRANCE, May 4-7, 2004.
  59. C. A. Bishop and J. Y. Hung, "Dynamics and control of a vehicle propelled by a rotating unbalanced mass," Proceedings of 8th IEEE International Workshop on Advanced Motion Control (AMC-2004), Kawasaki, JAPAN, March 2004, pp. 683-688.
  60. A. S. Hodel and J. Y. Hung, "A state estimator with reduced sensitivity to sensor quantization," 29th Annual Conference of IEEE Industrial Electronics Society (IECON-2003), Roanoke, VA, November 2-6, 2003, pp. 586-590.
  61. L. Guo, J. Y. Hung, and R. M. Nelms, "Digital controller design for buck and boost converters using root locus techniques," 29th Annual Conference of IEEE Industrial Electronics Society (IECON-2003), Roanoke, VA, November 2-6, 2003, pp. 1864-1869.
  62. Qi Feng, J. Y. Hung, and R. M. Nelms, "Digital control of a boost converter using Posicast," 2003 Applied Power Electronics Conference (APEC-2003), Miama, FL, February 9-13, 2003.
  63. M. Parmar and J. Y. Hung, "Modeling and sensorless optimal controller design for an electric power assist steering system," 28th Annual Conference of IEEE Industrial Electronics Society (IECON-2002) , Sevilla, SPAIN, November 2002.
  64. J. Y. Hung and M-Y. Chow, "Optimal excitation of a permanent magnet synchronous motor with an open-circuit phase," 28th Annual Conference of IEEE Industrial Electronics Society (IECON-2002), Sevilla, SPAIN, November 2002.
  65. Qi Feng, R. M. Nelms, and J. Y. Hung, "The application of Posicast control to DC-DC converters," 2002 Intersociety Energy Conversion Engineering Conference, paper #20160, Washington DC, July 28, 2002.
  66. J.Y. Hung, "Application of Posicast principles in feedback control," 2002 IEEE International Symposium on Industrial Electronics (ISIE-2002), L'Aquila, ITALY, July 2002.
  67. Liping Guo, J.Y. Hung, and R. M. Nelms, "PID controller modifications to improve steady-state performance of digital controllers for buck and boost converters," 2002 Applied Power Electronics Conference (APEC-2002), Dallas, TX, Feb 2002.
  68. Liping Guo, J.Y. Hung, and R. M. Nelms, "Design and implemenation of a digital PID controller for a buck converter," Proceedings of the 36th Intersociety Energy Conversion Engineering Conference, vol. 1, July/August 2001, pp. 187-192.
  69. N. G. Albritton and J. Y. Hung, "Reduced order state estimation using a model subset," 2000 IEEE International Symposium on Industrial Electronics (ISIE-2000), Puebla, MEXICO, Dec 4-8, 2000.
  70. K-K. Shyu, J. Y. Hung, and J. C. Hung, "Total sliding mode trajectory control of robotic manipulators," 25th Annual Conference of the IEEE Industrial Electronics Society (IECON-1999), San Jose, CA, Nov 1999.
  71. J. Y. Hung, "An integrated junior-year laboratory based on an autonomous mobile robot platform," ASEE/IEEE Frontiers in Education 1998 Conference, Tempe, AZ, Nov. 4-7, 1998.
  72. J. Y. Hung and S. M. Wentworth, "An integrated approach for Electrical Engineering laboratories," ASEE/IEEE Frontiers in Education 1998 Conference, Tempe, AZ, Nov. 4-7, 1998.
  73. C. A. Bishop, J. Y. Hung, M. E. Polites, "Dynamic modeling and control of rotating unbalanced mass (RUM) actuated devices," 1998 American Astronautical Society Guidance and Control Conference, Breckenridge, CO, Feb 1998.
  74. N. G. Albritton and J. Y. Hung, "Nonlinear control with digital signal processors," 23rd Annual Conference of the IEEE Industrial Electronics Society (IECON-1997), New Orleans, LA, Nov 1997.
  75. R. R. Boudreaux, R. M. Nelms, and J. Y. Hung, "Simulation and modeling of a DC-DC converter controlled by an 8-bit microcontroller," 12th Annual Applied Power Electronics Conference, Atlanta, GA, March 1997.
  76. C. A. Bishop, J. Y. Hung, M. E. Polites, and D. C. Alhorn, "Pointing and scanning control of optical instruments using rotating unbalanced masses," Guidance and Control 97, vol. 94, Advances in the Astronautical Sciences (Editors: R. D. Culp and S. B. Wiens), American Astronautical Society, 1997, pp. 251-265. Originally presented at the 1997 American Astronautical Society Guidance and Control Conference, Breckenridge, CO, Feb 1997.
  77. C. A. Bishop and J. Y. Hung, "Case methodology: Addressing the questions of how and why," 1996 ASEE Annual Conference, Washington, D.C., July 23-26, 1996.
  78. S. Nolan and J. Y. Hung, "Technology advances for magnetic bearings," Space Technology and Applications International Forum, American Institute of Physics Conference Proceedings 361, p. 169-174, Albuquerque, NM, Jan 1996.
  79. F. Xia, N. G. Albritton, J. Y. Hung, and R. M. Nelms, "A hybrid nonlinear control scheme for active magnetic bearings," Third International Symposium on Magnetic Suspension Technology, Tallahassee, FL, Dec 1995.
  80. C. P. Cho, B. Fussel, and J. Y. Hung, "A novel integrated electric motor/pump for underwater applications," 40th Conference on Magnetism and Magnetic Materials, Philadelphia, PA, Nov 1995.
  81. N. G. Albritton and J. Y. Hung, "Observers for sensorless control of industrial magnetic bearings," 21st Annual Conference of the IEEE Industrial Electronics Society (IECON-1995), Orlando, FL, Nov 1995.
  82. J. Y. Hung, R. M. Nelms, F. Xia, and M. Story, "Three-mode variable structure control of a pulse density modulated current feedback amplifier," 1995 IEEE International Symposium on Industrial Electronics (ISIE-1995), Athens, GREECE, pp. 736-740, July 1995.
  83. C. P. Cho, B. Fussel, and J. Y. Hung, "Cogging torque reduction, axial force variation, and output torque effect of a high-power density, axial field, brushless magnet motor," 1995 Incremental Motion Control Conference, San Jose, CA, June 5-8, 1995.
  84. R. R. Boudreaux, R. M. Nelms, J. Y. Hung, and L. C. Mathison, "Digital control of a buck converter using an 8-bit microcontroller," 10th High Frequency Power Conversion Conference, San Jose, CA, May 7-11, 1995.
  85. G. E. Ramey and J. Y. Hung, "Feasibility study of IVHS drifting out of lane alert system," in IVHS-IDEA Emerging Concepts and Products for Intelligent Transportation Systems, Transportation Research Board, National Research Council, National Academy Press, pp. 25-28, Sept 1994.
  86. J. Y. Hung and J. C Hung, "Chatter reduction in variable structure control," 20th Annual Conference of the IEEE Industrial Electronics Society (IECON-1994), Bologna, ITALY, Sept 1994.
  87. J. Y. Hung, "Efficient torque ripple minimization for variable reluctance motors," 19th Annual Conference of the IEEE Industrial Electronics Conference (IECON-1993), Lahaina, Maui, Hawaii, pp. 2104-2109, Nov 1993.
  88. H. Tan , M. E. Greene, and J. Y. Hung, "Integral augmented variable structure control: Design and testing," 19th Annual Conference of the IEEE Industrial Electronics Conference (IECON-1993), Lahaina, Maui, Hawaii, pp. 1962-7, Nov 1993.
  89. J. Y. Hung, "Magnetic bearing control using fuzzy logic," 1993 IEEE Industry Applications Society Annual Meeting, Toronto, Ontario, CANADA, pp. 2210-2215, Oct 1993.
  90. C. P. Cho, B. Fussel, and J. Y. Hung, "Cogging torque and axial force effects in an axial-field permanent magnet motor," IEEE Intermag 1993 Conference, Stockholm, Sweden, April 1993.
  91. J. Y. Hung, "Nonlinear magnetic bearing control using fuzzy logic," an invited paper for IEEE International Workshop on Neuro-Fuzzy Control, Muroran, Hokkaido, JAPAN, March 1993.
  92. J. Y. Hung, R. Nelms and P. Stevenson, "An output feedback sliding mode speed regulator for dc drives," 8th Annual IEEE Applied Power Electronics Conference, San Diego, CA, March 1993. ( Second Place, 1992-1993 Technical Paper Competition, IEEE Alabama Section.)
  93. J. Y. Hung and Z. Ding, "Minimization of torque ripple in permanent magnet motors," 18th Annual Conference of IEEE Industrial Electronics Society (IECON-1992), San Diego, CA, pp. 459-463, Nov 1992.
  94. D. Hanselman, J. Y. Hung, and M. Keshura, "Torque ripple analysis in brushless permanent magnet motor drives," International Conference on Electric Machines, Manchester, UK, Sept 1992.
  95. J. Y. Hung, "Nonlinear control of a magnetic levitation system," Proceedings of 17th Annual Conference of IEEE Industrial Electronics Society (IECON-1991), Kobe, Japan, Oct 1991.
  96. J. Y. Hung and R. M. Nelms, "Using a boundary layer technique to reduce chatter in sliding mode controllers," Proceedings of 6th Annual IEEE Applied Power Electronics Conference (APEC-1991), Dallas, TX, pp. 195-201, March 1991.
  97. J. Y. Hung, "Control of industrial robots that have transmission elasticity," Proceedings of 16th Annual Conference of IEEE Industrial Electronics Society (IECON-1990), Pacific Grove, CA, IEEE catalog no. 90CH2841-5, pp. 198-203, Nov. 1990.
  98. J. Y. Hung and A. S. Hodel, "Adaptive control to minimize shock in bang/bang systems," Proceedings of 16th Annual Conference of IEEE Industrial Electronics Society (IECON-1990), Pacific Grove, CA, IEEE catalog no. 90CH2841-5, pp. 204-209, Nov. 1990.
  99. J. Y. Hung, S. T. Hung, and B. R. Cain, "Exploiting a priori knowledge to design a controller for flexible-joint robots," Proceedings of 1990 IEEE SoutheastCon, New Orleans, LA, IEEE catalog no. 90CH2883-7, pp. 108-113, April 1990.
  100. S. Bortoff, J. Y. Hung, and M. W. Spong, "A discrete-time observer for flexible-joint manipulators," Proceedings of the 28th IEEE Conference on Decision and Control, Tampa, FL, IEEE catalog no. 89CH2642-7, pp. 2078-2082, Dec. 1989.
  101. M. W. Spong, J. Y. Hung, S. Bortoff, and F. Ghorbel, "A comparison of feedback linearization and singular perturbation techniques for the control of flexible joint robots," Proceedings of the1989 American Control Conference, Pittsburg, PA,June 1989.
  102. S. Bortoff, J. Y. Hung, and M. W. Spong, "Observer-based control guaranteeing uniform ultimate boundedness for a class of feedback linearizable systems," Proceedings of 1989 IEEE International Conference on Robotics and Automation, Phoenix, AZ, p. 1200, May 1989.
  103. F. Ghorbel, J. Y. Hung, and M. W. Spong, "Adaptive control of flexible joint manipulators," Proceedings of 1989 IEEE International Conference on Robotics and Automation, Phoenix, AZ, pp. 1188-1193, May 1989.
  104. J. C. Hung, J. Y. Hung, and H. V. White, "A comparison of adaptive and usual feedback control methods," Proceedings of the 14th Annual Conference of the IEEE Industrial Electronics Society (IECON-1988), SINGAPORE, IEEE catalog no. 88CH2602-1, pp. 276-280, Oct. 1988.

Back to John Hung's home page

Last updated 11 July 2017