Operation No.	Operation	Machine	Time (hrs)	Time for 2 handles (hrs)
010	Setup	Lathe	0.25	0.25
015	Face and center drill stock	Lathe	0.17	0.33
020	Turn square stock down to a round handle	Lathe	1.25	2.50
025	Knurl Handles	Lathe	0.50	1.00
030	Cut off handle length, Face and radius handle encs	Lathe	0.25	0.50
035	Set Up Mill	Mill	0.50	0.50
040	Cut V-grove in stock	Mill	0.25	0.50
045	Mill Setup	Mill	0.50	0.50
050	Drill thread holes and thru holes	Mill	1.00	2.00
055	Tap thread holes	Hand	0.33	0.67
060	Chamfer corners	Lathe	0.25	0.50
065	Cut off head to proper length	Band Saw	0.08	0.17
070	Finish cut end of head and file sharp corners	Mill	0.17	0.33
080	Clean-Up		1.00	1.00
			Total Time =	10.75 Hours