Projects
-
Novel Additive Manufacturing Qualification Methods for Army AviationU.S. Army AvMC
π 12/23 - 11/26
-
Development of Additive Manufacturing Material Allowables for Aluminum AlloysU.S. Army AvMC
π 12/23 - 11/26
-
Acquisition of An X-ray Diffraction Contrast Tomography Instrument Enabling Research and Education Towards Establishing Microstructure-Property RelationshipsNational Science Foundation (NSF), MRI Track β 1
π 09/23 - 08/26
-
Rapid Qualification for Additively Manufactured Safety-Critical ComponentsNational Science Foundation (NSF), RII Track β 2 FEC
π 01/22 - 12/25
-
Cold Plate Geometry Development & ProductibilityL3Harris
π 12/19 β 12/25
-
Additive Manufacturing Material and Process Rapid Qualification for Vehicle ApplicationsU.S. Army GVSC
π 06/23 β 06/25
-
Vehicle Equivalency Framework Utilizing Multiple Additive Manufacturing PlatformsU.S. Army GVSC
π 06/23 β 06/25
-
Additive Manufacturing Guidance for Aircraft Design & CertificationFederal Aviation Administration (FAA)
π 12/20 β 12/24
-
Generation of Additive Material Allowables for Ti-6Al-4V (GAMAT)Boeing Company
π 12/22 - 12/24
-
Rapid Analysis and Manufacturing Propulsion Technology (RAMPT)National Aeronautics and Space Administration (NASA)
π 04/19 β 03/24
-
On the Structural Integrity of Additive Manufactured Parts: Defect Criticality, In-situ Monitoring, Post Fabrication Non-Destructive Evaluation, and Cyber SecurityNational Institute of Standards and Technology (NIST)
π 10/19 β 09/24
-
Synergistic Effects of Defects & Microstructure on Mechanical Behavior of LB-PBF Metallic MaterialsNational Aeronautics and Space Administration (NASA)
π 09/21 β 07/24
-
Additive Manufacturing Product & Process AnalysesU.S. Army GVSC
π 01/22 β 01/24
-
Advancing Additive Manufacturing Directed Deposition TechniquesNational Aeronautics and Space Administration (NASA)
π 04/20 β 12/23
-
Cold Plate Geometry Development & ProductibilityL3Harris Technologies
π 12/19 β 12/23
-
Develop a Standard Work Item for Measuring Residual Stresses in Additive Manufactured PartsASTM International
π 11/22 β 10/23
-
Federated Deep Learning for Future Ubiquitous Distributed Additive ManufacturingNational Science Foundation (NSF)
π 09/21 β 08/23
-
Research and Development to Support Standardization for Additive Manufacturing: Feedstock, Process/Part Qualification, and Post-ProcessingASTM International
π 10/18 β 09/23
-
Multi-material Manufacturing of Eco-Friendly & Biodegradable Paper-Based Flexible Hybrid ElectronicsNational Science Foundation (NSF)
π 09/21 β 08/23
-
Surface Integrity of Additively Manufactured Ti-6al-4v PartsFederal Aviation Administration (FAA)
π 07/21 β 07/23
-
Launce Grant-transformative Dry Electronics PrinterAuburn Research and Technology Fund
π 08/22 β 07/23
-
In Space Additive Nanomanufacturing & Dry Printing of Multi-Materials ElectronicsNational Aeronautics and Space Administration (NASA)
π 03/22 β 02/23
-
Systematic Fatigue Test Spectrum Editing Using Wavelet Transformations FrameworkTechnical Data Analysis Inc. (TDA) with U.S. Navy
π 03/20 β 01/23
-
Mechanical Characterization of Additively Manufactured Parts via Newly Developed Super Alloy VDM 718Materials Sciences LLC (MSC)
π 02/22 β 01/23
-
Additive Manufacturing Guidance for Aircraft Design & CertificationFederal Aviation Administration (FAA)
π 12/20 β 12/22
-
Characterization of L-PBF IN718 for CMDSASTM International
π 07/21 β 12/22
-
Advancement in Artificial Intelligence & Machine Learning for Additive ManufacturingNational Aeronautics and Space Administration (NASA)
π 12/20 β 12/22
-
Evaluating the Criticality of Inherent Anomalies/Defects on the Fatigue Behavior of AM Metallic PartsFederal Aviation Administration (FAA)
π 06/20 β 11/22
-
Development of Ultra High Performance Additively Manufactured Injector Elements for Liquid Rocket and Rotating Detonation Rocket EnginesNational Aeronautics and Space Administration (NASA)
π 08/21 β 11/22
-
The Effect of Key Process Variables Drift on Mechanical Properties of Additive Manufactured MaterialsFederal Aviation Administration (FAA)
π 07/20 β 11/22
-
Specimen Design for Compression Testing of Metallic Lattice StructuresASTM International
π 11/20 β 10/22
-
NIST Center for in-situ Metrology and Process Science for Advanced Manufacturing (iMaPS)National Institute of Standards and Technology (NIST)
π 10/18 β 09/22
-
Physics-based Multiscale Additively Manufactured Superalloy Design for Optimized High Cycle Fatigue LifeDepartment of Energy (DOE)
π 10/19 β 09/22
-
MRI: Acquisition of an X-ray Computed Nanotomography System with Planar Biaxial Material Testing to Advance Understanding of Natural and Engineered MaterialsNational Science Foundation (NSF)
π 10/19 β 08/22
-
Additive Nanomanufacturing of Multifunctional Materials and Hybrid StructuresNational Science Foundation (NSF)
π 09/19 β 08/22
-
MRI: Development of a Non-Equilibrium Plasma Coupled Rapid Compression Machine by Additive ManufacturingNational Science Foundation (NSF)
π 09/19 β 08/22
-
Advanced Space Power & Propulsion PartnershipNational Aeronautics and Space Administration (NASA)
π 09/20 β 08/22
-
Density Measurement Approaches for Additively Manufactured PartsASTM International
π 10/21 β 07/22
-
Geometry Based Thermal Management Solution for PropulsionQuadrus Advanced Manufacturing LLC
π 02/22 β 06/22
-
Effect of Powder Reuse on the Tensile and Fatigue Properties of Directed Energy Deposited (DED) HR-1 AlloyNational Aeronautics and Space Administration (NASA)
π 10/19 β 05/22
-
Ni-base Super Alloy Powder for Fabricating L-PBF Parts towards Characterization and QualificationNational Aeronautics and Space Administration (NASA)
π 12/20 β 12/21
-
Additively Manufacturing Cold Plate Development and ProducibilityL3Harris Technologies
π 12/19 β 12/21
-
Internally Cooled Parts Using Additive Manufacturing TechnologyMainstream Engineering Corporation
π 10/20 β 09/21
-
Degradation of Polymer Parts Deployed in Harsh EnvironmentsAmerica Makes (Subcontract through NIAR)
π 06/19 β 08/21
-
Advancing Additive manufacturing Post-processing Techniques (AAPT)America Makes
π 02/19 β 08/21
-
Additive Manufacturing of Durable, Next-Generation Implants and OrthoticsAU Presidential Award for Interdisciplinary Research (PAIR)
π 07/18 β 06/21
-
Characterization of Ali10Mg SpecimensASTM International
π 04/21 β 06/21
-
Cyber Security for Additive Manufacturing -TrainingAmerica Makes with ASTM International
π 11/20 β 05/21
-
Machine Learning Tools to Optimize Metal Additive Manufacturing Process Parameters to Enhance Fatigue Performance of Aircraft ComponentsMaterials Resources LLC with U.S. Navy
π 05/20 β 05/21
-
Creation of 3D Printed, Custom, Bridging Implants for Fracture Stabilization Utilizing Computer ModelingMorris Animal Foundation Grant
π 09/20 β 02/21
-
Fatigue Prediction for Additive Manufactured (AM) Metallic ComponentsProduct Innovation and Engineering LLC (PINE) with U.S. Navy
π 11/19 β 10/20
-
Effect of Powder Degradation on Mechanical Performance of Additive Manufactured Inconel 718 partsDelta Airlines, Inc.
π 01/18 β 02/20
-
Powder to Study the Effects of Post Processing on the Structural Integrity of Additive Manufactured MaterialsUS Navy (NAVAIR)
π 01/19 β 12/19
-
Enabling the Digital Twin for Additively-Manufactured Metallic Parts via Defect-Sensitive Mechanical ModelsNational Aeronautics and Space Administration (NASA)
π 10/18 β 09/19
-
Design & Optimization of Additively Manufactured Lattice Structures for Bio-medical ImplantsMaterials Sciences Corp
π 01/19 β 08/19
-
ASTM Center for Additive Manufacturing Excellence at Auburn UniversityASTM International
π 07/18 β
-
Powder to Study the Effects of Post Processing on the Structural Integrity of Additive Manufactured MaterialsU.S. Navy (NAVAIR)
π 06/18 β 12/18
-
Optimized Build Plate Design Tool for Metal Laser Powder Bed Additive ManufacturingTechnical Data Analysis Inc. (TDA) with U.S. Navy
π 09/18 β 03/19
-
Cooling System for Laser EnclosurePhotonwares Corporation with U.S. Navy
π 06/18 β 01/19
-
Additive Manufacturing of Durable Mission-Critical Components by Establishing Process-Structure-Property-Performance RelationshipsNational Aeronautics and Space Administration (NASA)
π 10/17 β 09/18
-
Effects of Process & Design Parameters on Fatigue Behavior of Additively-Manufactured 17-4 PH Stainless SteelUS Navy (NAVAIR)
π 01/17 β 05/18
-
Optimized Build Plate Design Tool for Metal Laser Powder Bed Additive ManufacturingTechnical Data Analysis Inc. (TDA) with U.S. Navy
π 10/17 β 04/18
-
Fatigue Behavior & Failure Mechanisms of Additively Manufactured Inconel 718National Aeronautics and Space Administration (NASA)
π 04/17 β 04/18
-
Extending the Additive Manufacturing Technology to Novel Applications: Planning PhaseKorea Institute of Industrial Technology (KITECH)
π 10/17 β 02/18