PUBLICATIONS
BOOKS AND BOOK
CHAPTERS
JOURNAL ARTICLES
(* indicates graduate student)
‘Experimental study of dynamic crack growth in
unidirectional graphite/epoxy composites using digital image correlation and
high-speed photography’, D. Lee, H. V. Tippur, M. S. Kirugulige and P. Bogert, Journal of Composite Materials,
accepted, 2008.
‘Processing,
compression response and finite element modeling of syntactic foam based
interpenetrating phase composite’, R. Jhaver and H. V. Tippur, Materials Science and Engineering – A, (doi:
10.1016/j.msea.2008.09.042), Vol. 499, pp 507–517, 2009.
'Tensile
stress-strain response of glass-filled epoxy under elevated rates of loading
using a split Hopkinson bar apparatus', A. T. Owens* and H. V. Tippur, Experimental Mechanics, doi:
10.1007/s11340-008-9192-7, to appear, 2008.
'Measurement of surface
deformations and fracture parameters for a mixed-mode crack driven by stress
waves using image correlation technique and high-speed photography, M. S.
Kirugulige* and H. V. Tippur, Strain, doi:
10.1111/j.1475-1305.2008.00449.x, to appear, 2008.
'Mixed-mode
dynamic crack growth in a functionally graded particulate composite: Experimental
Measurements and numerical simulations', M. S. Kirugulige* and H. V.
Tippur, ASME Journal of Applied
Mechanics, Vol. 75, No. 5, paper # 051102, pp 1-14, 2008.
'Dynamic
crack growth past a stiff inclusion: Optical investigation of inclusion
eccentricity and inclusion-matrix adhesion strength', R. Kitey* and H. V.
Tippur, Experimental Mechanics, Vol. 48, No. 1, pp 37-54, 2008.
'A
numerical study of inclusion-matrix debonding in the presence of a nearby
crack', P. C. Savalia* and H. V. Tippur, Engineering Fracture Mechanics,
Vol. 75, pp 926-942, 2008.
'Measurement
of transient deformations using digital image correlation method and high-speed
photography', M. S. Kirugulige*, H. V. Tippur and T. S. Denney, Applied
Optics, Vol. 46, No. 24, pp 5083-5096, 2007.
'A
study of crack-inclusion interactions and matrix-inclusion debonding using
moire interferometry and finite element method', P. C. Savalia* and H. V.
Tippur, Experimental Mechanics, Vol. 47, No. 4, pp 533-548, 2007.
SGBEM
Analysis of Crack-Particle Interactions due to Elastic Constants Mismatch’,
R. Williams, A.-V. Phan, H. V. Tippur, T. Kaplan and L. J. Gray, Engineering
Fracture Mechanics, Vol. 74, pp 314-331, 2007.
'Modeling
Crack Growth through Particle Clusters in Brittle Matrix using
Symmetric-Galerkin Boundary Element Method', R. Kitey*, A-V. Phan, H.
V. Tippur, and T. Kaplan, International Journal of Fracture Mechanics,
Vol. 141, No. 1, pp 11-25, 2006.
'Mixed-mode
dynamic crack growth in functionally graded glass-filled epoxy', M.
S. Kirugulige* and H. V. Tippur, Experimental Mechanics, Vol. 46, No. 2,
pp 269-281, 2006.
'Dynamic
crack growth in particulate bimaterials having discrete and diffuse interfaces:
Role of microstructure', R. Kitey* and H. V. Tippur, Engineering
Fracture Mechanics, Vol. 72, pp 2721-2743, 2005.
’Role
of Particle Size and Filler-Matrix Adhesion on Dynamic Fracture of Glass-Filled
Epoxy: I. Macromeasurements’, R. Kitey* and H. V. Tippur, ActaMaterialia,
Vol. 53, pp 1153-1165, 2005.
’Role
of Particle Size and Filler-Matrix Adhesion on Dynamic Fracture of Glass-Filled
Epoxy: II.
Linkage Between Macro and Micro Measurements’, R. Kitey* and H. V. Tippur, Acta
Materialia, Vol. 53, pp 1167-1178, 2005.
'Dynamic
Fracture Behavior of Model Sandwich Structures with Functionally Graded Core: A
Feasibility Study', M. S. Kirugulige*, R. Kitey* and H. V. Tippur, Composites
Science and Technology, Vol. 65, pp 1052-1068, 2005.
'A Method
for Measuring Mode I Crack Tip Constraint under Static and Dynamic Loading
Conditions', M. J. Maleski*, M. S. Kirugulige* and H. V. Tippur, Experimental
Mechanics, Vol. 44, No. 5, pp 522-532, 2004.
'Simultaneous
and Real-Time Measurement of Slope and Curvature Fringes in Thin Structures
using Shearing Interferometry', H. V. Tippur, Optical Engineering,
Vol. 43, No. 12, 2004.
'Dynamic Fracture Behavior of Syntactic Epoxy
Foams: Optical Measurements Using Coherent Gradient Sensing’, M.A. El-Hadek*
and H.V. Tippur, Optics and Lasers in Engineering, Vol. 40, pp 353-369,
2003.
‘Simulation of Porosity by Microballoon Dispersion in Epoxy and Urethane:
Mechanical Measurement and Models’, M. A. El-Hadek* and H.V. Tippur, Journal
of Materials Science, Vol. 37 No. 8, pp 1649-1660 2002.
'Influence
of Elastic Variations on Crack Initiation in Functionally Graded Glass-Filled
Epoxy', C.-E. Rousseau* and H.V. Tippur, Engineering Fracture Mechanics,
Special Issue on 'Fracture of Functionally Graded Materials', Vol. 69,
1679-1693, 2002.
‘Influence
of Elastic Gradient Profiles on Dynamically Loaded Functionally Graded
Materials: Cracks Along the Gradient’, C.-E. Rousseau* and H.V. Tippur, International
Journal of Solids and Structures, Vol. 38, pp 7839 - 7856, 2002.
‘Evaluation
of Crack Tip Fields and Stress Intensity Factors in Functionally Graded Elastic
Materials: Cracks Parallel to Elastic Gradient, C. -E. Rousseau* and H.V.
Tippur, International Journal of Fracture, Vol. 114, pp 87-111, 2002.
‘Dynamic
Fracture of Compositionally Graded Materials with Cracks along the Elastic
Gradient’, Experiments and Analysis, C.-E. Rousseau* and H.V. Tippur, Mechanics
of Materials, Vol. 33, pp 403-421, 2001.
'Compositionally
Graded Materials with Cracks Normal to the Elastic Gradient: Examination of
Fracture Parameters Relative to Bimaterials’, C.-E. Rousseau* and H.V.
Tippur, Acta Materialia, Vol. 48, pp 4021-4033, 2000.
‘Dynamic
response of bimaterial and graded interface cracks under impact loading’,
P.R. Marur* and H.V. Tippur, International Journal of Fracture, Vol.
103, pp 95-109, 2000.
‘Numerical
analysis of crack tip fields in functionally graded materials with a crack
normal to the elastic gradient’, P. R. Marur*, and H. V. Tippur, International
Journal of Solids and Structures, Vol. 37, pp. 5353-5370, 2000.
‘A
strain gage method for determination of fracture parameters in bimaterial
systems’, P.R. Marur* and H.V. Tippur, Engineering Fracture Mechanics,
Vol. 64, No. 1, pp 87-104, 1999.
‘Measurement
of contact stresses using real-time shearing interferometry’, L. Xu*, H.V.
Tippur and C. -E. Rousseau*, Optical Engineering, Vol. 38, No. 11, pp
1932-1937, 1999.
‘A
functionally graded particulate composite: Preparation, measurements and
Failure analysis’, R.J. Butcher*, C. -E. Rousseau* and H.V. Tippur, Acta
Materialia, Vol. 47, No.1, pp 259-268, 1998.
‘Crack tip field mapping and crack initiation in bimaterials subjected to
thermal and thermal-mechanical loading’, P. Ganeshan*, H.V. Tippur and J.K.
Sinha*, Journal of Thermal Stresses, Vol. 22, No.6, pp 615-635, 1999.
‘An Infrared Interferometer for
Elasto-Plastic Crack Tip Investigation of Homogeneous and Bimaterial Beams: A
study of 3-D effects and J-dominance’, J.K. Sinha* and H.V. Tippur, ASME Journal
of Applied Mechanics, Vol. 65, No. 4, pp 1032-1041, 1998.
‘Evaluation of Mechanical
Properties of Functionally Graded Materials’, by P. Marur* and H. V.
Tippur, ASTM Journal of Testing and Evaluation, Vol. 26, No. 6, pp
539-545, 1998.
‘Evaluation of interfacial
fracture parameters in solder-copper bimaterials using moiré interferometry’,
H. Krishnamoorthy* and H.V. Tippur, ASME Journal of Electronic Packaging,
Vol. 120, No. 3, pp 267-273, 1998.
‘Extracting fracture parameters using a modified local collocation of
full-field displacement data’, H. Krishnamoorthy* and H.V. Tippur, Experimental
Techniques, Vol. 22, No.1, pp 22-26, 1998.
‘Infrared
Interferometry for rough surface deformation measurements: Application to
failure characterization and flaw detection’, J.K. Sinha*, and H.V. Tippur,
Optical Engineering, Vol.36, No.8, pp 2233-2240, 1997.
‘An
interferometric and finite element investigation of interfacial crack tip
fields: The role of mode-mixity on 3-D stress variations', J.K. Sinha*,
H.V. and L. TippurXu*, International Journal of Solids & Structures,
Vol. (34), No.6, pp 741-754, 1997.
‘Interfacial
crack initiation under quasi-static and dynamic loading conditions: An
experimental study', H.V. Tippur and L. Xu*, Vol. (20), No.1, Fatigue
and Fracture of Engineering Materials & Structures, pp 49-61, 1997.
‘Fracture
parameters for interfacial cracks: Experimental-finite element analysis of
crack tip fields and crack initiation toughness', L. Xu* and H.V. Tippur, International
Journal of Fracture, Vol.71, pp 345-363, 1995.
‘Measurement of interfacial fracture
parameters using coherent gradient sensing (CGS)’, H.V. Tippur and L Xu*, Strain,
Vol. 31, No. 4, pp 143-149, 1995.
‘Interpretation of Fringes Obtained Using Coherent Gradient Sensing’, H.V.
Tippur, Applied Optics, Vol. 33, pp 4167-4170, 1994.
‘Measurement
of Mixed-Mode Fracture Parameters Near Cracks in Homogeneous and Bimaterial
Beams’, H.V. Tippur and
‘Mixed-Mode
Crack Tip Deformations Studied Using a Modified Flexural Specimen and Coherent
Gradient Sensing’,
‘Coherent
Gradient Sensing: A Fourier Optic Analysis and Applications to Fracture’,
H.V. Tippur, Applied Optics, Vol. 31, No. 22, pp 4428-4438, 1992.
‘Measurement of Transient Crack Tip Deformation Fields Using the Method of
Coherent Gradient Sensing", S. Krishnaswamy, H.V. Tippur and A.J. Rosakis,
Journal of the Mechanics and Physics of Solids, Vol.40, No.2, pp
339-372, 1992.
‘Quasi-Static and Dynamic Crack Growth along Bimaterial Interfaces: A Note on
Crack Tip Field Measurements Using Coherent Gradient Sensing’, H.V. Tippur and
A.J. Rosakis, Experimental Mechanics, Vol.31, No.3, pp 243-251, 1991.
‘Analysis
of Combined Moiré and Laser Speckle-Grating Methods for 3-D Crack Tip
Deformation Studies’, H.V. Tippur and F.P. Chiang, Applied Optics,
Vol.30, No.19, pp 2748-2756, 1991.
‘Optical
Mapping of Crack Tip Deformations using the Methods of Transmission and
Reflection Coherent Gradient Sensing: A Study of Crack Tip K-dominance’,
H.V. Tippur, S. Krishnaswamy and A.J. Rosakis, International Journal of
Fracture, Vol.52, pp 91-117, 1991.
‘On the Application
of the Optical Method of Caustics to Elasto-dynamic Crack Problems: Limitations
of the Classical Interpretation’, A.J. Rosakis, S. Krishnaswamy and H.V.
Tippur, Optics and Lasers in Engineering, Vol.13, pp 183-210, 1990.
‘A
Coherent Gradient Sensor for Crack Tip Deformation Measurements: Analysis and
Experimental Results’, H.V. Tippur, S. Krishnaswamy and A.J. Rosakis, International
Journal of Fracture, Vol.48, pp 193-204, 1991.
‘Optical and Finite Element Investigation of a Plastically Deformed Surface
Flaw under Tension’, J.C. Olinkiewicz, T.V. Hareesh and F.P. Chiang, ASTM
STP-1060, pp 112-129, 1990.
‘Three
Dimensional Crack Tip Deformation: An Experimental Study and Comparison to HRR
Field’, F.P. Chiang and T.V. Hareesh, International Journal of Fracture,
Vol.36, pp 243-257, 1988.
‘Integrated Experimental-Finite Element Approach to Study Elasto-Plastic Crack
Tip Field’, T.V. Hareesh and F.P. Chiang, Engineering Fracture Mechanics,
Vol. 31, No. 3, pp 451-461, 1988.
‘Optical Analysis of the HRR Field’, F.P. Chiang, T.V. Hareesh, B.C. Liu and S.
Li, Optical Engineering, Vol.27, No. 8, pp 625-629, 1988.
‘Determination of Stress Intensity Factors for Cracks in Tubes Under Torsion’,
L.S. Srinath, N. Srinivasa Murthy and T.V. Hareesh, Experimental Mechanics,
Vol.23, No. 3, pp 262-267, 1983.