Publications

 

 

 

Refereed journal

 

1.              W. Shen, L.C. Mathison, V.A. Petrenko, and B.A. Chin, “Phage coated Magnetoelastic Micro-biosensors for Real-time Detection of Bacillus anthracis Spores,” Sensors & Actuators: B. Chemical, Accepted January 30, 2009, doi: 10.1016/j.snb.2009.01.027

 

2.                  Fei Xie, Hong Yang, Suiqiong Li, Wen Shen, Jeihui Wan, Michael L. Johnson, Howard C. Wikle, Dong-Joo Kim, and Bryan A. Chin. “Amorphous Magnetoelastic Sensors for the Detection of Biological Agents.” META3914. Intermetallics. 17 (2009), pp. 270-273, Available online 22 January 2009. doi:10.1016/j.intermet.2008.07.024

 

3.                  Michael L. Johnson, Odum LeVar, Sang H. Yoon, Jung-Hyun Park, Shichu Huang, Dong-Joo Kim, Zhongyang Cheng, and Bryan A. Chin. “Dual-cathode method for sputtering magnetoelastic iron-boron films.” Vacuum, In Press, Corrected Proof, Available online 18 November 2008. doi:10.1016/j.vacuum.2008.11.004

 

4.                  Suiqiong Li, Michael Johnson, Jiehui Wan, Valery Petrenko, and Bryan A. Chin. “Microfabricated Magnetoelastic Biosensors for the Detection of Bacillus Anthracis Spores.” ECS Transactions (Issue Title: Chemical Sensors 8: Chemical (Gas, Ion, Bio) Sensors and Analytical Systems), Vol. 16, pp 177-185, 2008. doi:10.1149/1.2981119

 

5.                  Z.-Y. Cheng, S.Q. Li，K.W. Zhang, L.L. Fu, and B.A. Chin. “Novel Magnetostrictive Microcantilever and Magnetostrictive Nanobars for High Performance Biological Detection.” Advances in Science and Technology, Vol. 54, pp 19-28, 2008. (Online available at http://www.scientific.net ID: 131.204.13.154-03/09/08,15:18:08)

 

6.                  S. Huang, H. Yang, R. S. Lakshmanan, M. L. Johnson, J. Wan, I.-H. Chen, H. C. Wikle, III, V. A. Petrenko, J. M. Barbaree, and B. A. Chin. “Sequential Detection of Salmonella typhimurium and Bacillus anthracis Spores using Magnetoelastic Biosensors.” Biosensors and Bioelectronics (2008). doi:10.1016/j.bios.2008.09.006

 

7.                  S. Huang, S.-Q. Li, H. Yang, M. Johnson, J. Wan, I. Chen, V. A. Petrenko, J. M. Barbaree, and B. A. Chin. “Optimization of Phage-Based Magnetoelastic Biosensor Performance.” Special Issue of Sensors & Transducers Journal on Microsystems: Technology and Application. (ISSN 1726-5479), Vol. 3, December 2008. pp 87-96. Available online: http://www.sensorsportal.com/HTML/DIGEST/P_SI_59.htm

 

8.                  S. Huang, H. Yang, R.S. Lakshmanan, M.L. Johnson, I. Chen, J. Wan, H.C. Wikle, V.A. Petrenko, J.M. Barbaree, Z.Y. Cheng, and B.A. Chin. “The Effect of Salt and Phage Concentrations on the Binding Sensitivity of Magnetoelastic Biosensors for Bacillus anthracis Detection.” Biotechnology and Bioengineering, Volume 101 Issue 5, p 1014-1021 (2008). doi: 10.1002/bit.21995

 

9.                  S. Huang, J. Hu, J. Wan, M.L. Johnson, H. Shu, and B.A. Chin, “The Effect of Annealing and Gold Deposition on the Performance of Magnetoelastic Biosensors,” Materials Science and Engineering C, 28, pp 380–386, 2008. doi:10.1016/j.mscc.2007.04.006

 

10.              Guntupalli, R., R. Lakshmanan, J. Wan, J. Hu, T.S. Huang, J.M. Barbaree, V.J. Vodyanoy, and B.A. Chin. “Analytical performance and characterization of antibody immobilized magnetoelastic biosensors.” Sens. & Instrumen. Food Qual. 2:27-33, 2008. doi: 10.1007/s11694-007-9025-x

 

11.              Michael L. Johnson, Jiehui Wan, Shichu Huang, Zhongyang Cheng, Valery A. Petrenko, Dong-Joo Kim, I.-Hsuan Chen, James M. Barbaree, Jong Wook Hong, and Bryan A. Chin, “A wireless biosensor using microfabricated phage-interfaced magnetoelastic particles,” Sensors and Actuators A 144, pp 38–47, 2008. Reference: SNA6181; Corresponding author: Dr. Michael L. Johnson；doi: 10.1016/j.sna.2007.12.028)

 

12.              Jiehui Wan, Michael L. Johnson, Rajesh Guntupalli, Valery A. Petrenko, and Bryan A. Chin. “Detection of Bacillus anthracis spores in liquid using phage-based magnetoelastic micro-resonators.” Sensors and Actuators B: Chemical, Volume 127, Issue 2, Pages 559-566, 2007. doi:10.1016/j.snb.2007.05.017

 

13.              Ramji S. Lakshmanan, R. Guntupalli, J. Hu, D. J. Kim, V. A. Petrenko, J. M. Barbaree, and B. A. Chin. “Phage based magnetoelastic sensor for the detection of Salmonella typhimurium.” Journal of Microbiological Methods. Volume 71, Issue 1, October 2007, Pages 55-60. doi:10.1016/j.mimet.2007.07.012

 

14.              Ramji S. Lakshmanan, R. Guntupalli, J. Hu, Valery A. Petrenko, James. M. Barbaree, and Bryan. A. Chin. “Detection of salmonella typhimurium in fat free milk using a phage immobilized magnetoelastic sensor.” Sensors and Actuators B, Volume 126, Issue 2, 1 October 2007, Pages 544-550. doi:10.1016/j.snb.2007.04.003

 

15.              R. Guntupalli, Ramji S. Lakshmanan, J. Hu, T. S. Huang, James. M. Barbaree, V. J. Vodyanoy, and Bryan. A. Chin, “Rapid and sensitive magnetoelastic biosensors for the detection of Salmonella typhimurium in a mixed microbial population,” Journal of Microbiological Methods; Vol 70, Issue 1, July 2007, Pages 112-118. doi:10.1016/j.mimet.2007.04.001

 

16.              R. Guntupalli, R. S. Lakshmanan, M. L. Johnson, J. Hu, T.-S. Huang, J. M. Barbaree, V. J. Vodyanoy, and B. A. Chin. “Magnetoelastic biosensor for the detection of Salmonella typhimurium in food products,” Sensing and Instrumentation for Food Quality and Safety, March 2007, Volume 1, Issue 1, Pages 3-10. doi:10.1007/s11694-006-9003-8

 

17.              R. Guntupalli, J. Hu, R. S. Lakshmanan, T. S. Huang, J. M. Barbaree, and B. A. Chin. “A Magnetoelastic Resonance Biosensor Immobilized with Polyclonal Antibody for the Detection of Salmonella Typhimurium.” Biosensors and Bioelectronics. Volume 22. Issue 7. pp.1474-1479, February, 2007. doi:10.1016/j.bios.2006.06.037

 

18.              J. Wan, H. Shu, S. Huang, B. Fiebor, I-H. Chen, V. A. Petrenko, and B. A. Chin, “Phage-based Magnetoelastic Wireless Biosensors for Detecting Bacillus anthracis Spores,” IEEE Sensors Journal, Vol 7, Issue 3, pp. 470-477, March 2007. doi:10.1109/JSEN.2006.890135

 

19.              H. Fan, H.Yang, N.K. Ravala, H.C. Wikle, III, R. Zee, and B.A. Chin, “Hafnium carbide structural foams synthesized from polymer precursors.” Transactions of Nonferrous Metals Society of China, 16, pp. 85-88, 2006.

 

20.              B. Sorokulova, E. V. Olsen, I. H. Chen, B. Fiebor, J. M. Barbaree, V. J. Vodyanoy, B. A. Chin, and V. A. Petrenko. “Landscape phage probes for Salmonella typhimurium.” Journal of Microbiological Methods. Volume 63. Issue 1. pp. 55-72. October, 2005. doi:10.1016/j.mimet.2005.02.019

 

21.              H. Fan, N. K. Ravala, and B. A. Chin. “Low Cost Infrared Sensing System for Monitoring the Welding Process in the Presence of Plate Inclination Angle.” Journal of Materials Processing Technology. Volume 140. pp. 668-675. 2003. doi: 10.1016/S0924-0136(03)00836-7

 

22.              E.V. Olsen, S.T. Pathirana, A.M. Samoylov, J.M. Barbaree, B.A. Chin, W.C. Neely, and V. Vodyanoy. “Specific and Selective Biosensor for Salmonella and its Detection in the Environment.” Journal of Microbiological Methods. Volume 53. pp. 273-285. 2003. doi: 10.1016/S0167-7012(03)00031-9

 

23.              Y.X. Gan, H.A. Aglan, R.V. Steward and B.A. Chin. “Microstructure-Fracture Toughness Relationship of Vanadium Alloy/Stainless Steel Brazed Joints,” Journal of Nuclear Materials. Volume 299. Issue 2, pp. 157-164, November, 2001.

 

24.              Y.X. Gan, H.A. Aglan, R.V. Steward and B.A. Chin. “Fatigue Failure Mechanisms of Vanadium Alloy /Stainless Steel Brazed Joints,”  Journal of Materials Science Letters, Vol. 20, Issue 20, pp. 1909-1911, 2001.

 

25.              R.H. Zee, Z. Xiao, B.A. Chin, and J. Liu. “Processing of Single Crystals for High Temperature Applications.” Journal of Materials Processing Technology. Volume 113. pp. 75-80. 2001.

 

26.              H. C. Wikle III, S. Kottilingam, R.H. Zee, and B.A. Chin. “Infrared Sensing Techniques for Penetration Depth Control of the Submerged Arc Welding Process.” Journal of Materials Processing Technology. Volume 113. pp. 228-233. 2001.

 

27.              S.T. Pathirana, J. Barbaree, B.A. Chin, M.G. Hartell, W.C. Neely, and V. Vodyanoy. “Rapid and Sensitive Biosensor for Salmonella.” Biosensors and Bioelectronics. Volume 15. pp. 135-141. 2000.

 

28.              Z.C. Lin, W. Yu, R.H. Zee, and B.A. Chin. “CuAlPd Alloys for Sensor and Actuator Applications.” Intermetallics. Volume 8. pp. 605-611. 2000.

 

29.              R. Steward, M. Grossbeck, H. Aglan, Y. Gan, and B. A. Chin. “Furnace Brazing Type 304 Stainless Steel to Vanadium Alloy (V-5Cr-5Ti).” Journal of Nuclear Materials. Volume 283. pp. 1224-1228. December, 2000.

 

30.              H. Aglan, Y.X. Gan, B. A. Chin, and M. Grossbeck. “Effect of Composition on the Fatigue Failure Behavior of Vanadium Alloys.” Journal of Nuclear Materials. Volume 278. pp. 935-943. 2000.

 

31.              H. Aglan, Y.X. Gan, B. A. Chin, and M. Grossbeck. “Fatigue Failure Analysis of V-4Ti-4Cr Alloy.” Journal of Nuclear Materials. Volume 273. pp. 192-202. 1999.

 

32.              H. C. Wikle III, R.H. Zee, and B. A. Chin. “A Sensing System for Weld Process Control.” Journal of Materials Processing Technology. Elsevier Publications. Volume 89. pp. 254-260. May, 1999.

 

33.              J. Liu, B.A. Chin, and R.H. Zee. “Processing and High Temperature Properties of Refractory Alloy Single Crystals.” Journal of Materials Processing Technology. Elsevier Publications. Volume 89. pp. 425-432. May, 1999.

 

34.              W. Yu and B.A. Chin. “Preparation of PZT Thin Films on Hastelloy Substrate Using Sol-Gel Processing.” Ceramic Transactions. American Ceramic Society. Volume 95. pp. 110-117. 1998.

 

35.              H.C. Wikle, III, S.F. Chen, S. Nagarajan, and B.A. Chin, “Survey of infrared sensing techniques for welding process monitoring and control,” Journal of the Chinese Institute of Engineers, 21, pp.645-657, 1998.

 

36.              C.A. Wang, M.L. Grossbeck, H. Aglan and B.A. Chin, “The Effect of an Applied Stress on the Welding of Irradiated Steels,”  Journal of Nuclear Materials. Volume 239. Issue 1-3, pp. 85-89, 1996.

 

37.              S. Chen, T. Bao, and B.A. Chin.  “Braze Joints of Dispersion Strengthened Copper,” Journal of Nuclear Materials. Volume 233. pp. 902-905, 1996.

 

38.              H.C. Wikle, Z.C. Lin, and B.A. Chin. “Development of Cu-Mn Shape Memory Alloys for Repair Applications.” Plasma Devices and Operations. Volume 4. pp. 227-234. 1996.

 

39.              C.A. Wang, M.L. Grossbeck, and B.A. Chin. “Technique to Suppress Cracking During Welding of Helium Containing Type 316 SS.” Plasma Devices and Operations. Volume 4. pp. 187-200. 1996.

 

40.              S. Chen and B.A. Chin. “Low Activation Braze Joint of Dispersion Strengthened Copper.” Journal of Nuclear Materials. Volume 225. pp. 132-136. 1995.

 

41.              C.A. Wang, M.L. Grossbeck, N.B. Potluri, and B.A. Chin. “Welding of Irradiated Stainless Steel.” Journal of Nuclear Materials. Volume 233-236. pp. 213-217. 1996.

 

42.              C.A. Wang, M.L. Grossbeck, and B.A. Chin. “Threshold Helium Concentration Requried to Initiate Cracking During Welding of Irradiated Stainless Steel,”  Journal of Nuclear Materials. Volume 225. pp. 59-68. 1995.

 

43.              P Banerjee, S. Govardhan, H. Wikle, J. Liu, and B. A. Chin. “Infrared Sensing for On-line Weld Geometry Monitoring and Control.” Journal of Engineering for Industry. Volume 117. pp. 323-330. August, 1995.

 

44.              J.Y. Liu and B.A. Chin. “Brazing of Vanadium and C-C Composites to Stainless Steel.” Journal of Nuclear Materials. Volume 212-215. pp. 1590-1593. 1994.

 

45.              J. Cohron, R.H. Zee, and B.A. Chin. “Degradation of Refractory Metal Carbides by Hot Hydrogen.” Journal of Nuclear Materials. Volume 212-215. pp. 1488-1491. 1994.

 

46.              S.F. Chen, J. Liu, R.H. Zee, and B.A. Chin. “Creep, Thermal Cyclic and Tensile Properties of Nb-1Zr to Stainless Steel Transition Joints.” Journal of Nuclear Materials. Volume 212-215. pp. 1569-1573. 1994.

 

47.              S.F. Chen, J.Y. Liu, and B.A. Chin. “Effect of Alumina Strengthening Particles on Brazed Joint of Glidcop A1-15 Copper Alloy.” Journal of Nuclear Materials. Volume 212-215. pp. 1600-1604. 1994.

 

48.              G.R. Rao, E.H. Lee, B.A. Chin and L.K. Mansur. “Effects of Simultaneous Boron and Nitrogen Implantation Effects on Microhardness and Fatigue Properties of Fe-13Cr-15Ni Alloys.” Metallurgical and Metal Transactions A. Volume 25A. pp. 193-202. January, 1994.

 

49.              P. Banerjee, S. Govardhan, H.C.Wikle, J.Y. Liu, and B.A. Chin, “Infrared sensing for on-line weld process monitoring and control,” Manufacturing Science and Engineering, pp. 907-918, 1993

 

50.              S. Nagarajan, H.C. Wikle, and B.A. Chin. “On-Line Identification and Control of Part-Preparation and Fixturing Errors in Arc Welding.” Journal of Engineering for Industry. Volume 115. pp. 385-390. November, 1993.

 

51.              G.R. Rao, E.H. Lee, L.A. Boatner, B.A. Chin, and L.K. Mansur. “Multiple Ion Implantation Effects on Hardness and Fatigue Properties of Fe-13Cr-15Ni Alloys.” Journal of Nuclear Materials. Volume 192. pp. 748-753. 1992.

 

52.              S. Nagarajan, H.C. Wikle III, and B.A. Chin. “On-line Weld Position Control for Fusion Reactor Welding.” Journal of Nuclear Materials. Volume 191-194. pp. 1060-1064. 1992.

 

53.              C.A. Wang, R.L. Klueh, and B.A. Chin. “The Weldability of Low Activation Cr-W Steels.” Journal of Nuclear Materials. Volume 193. pp. 831-835. 1993.

 

54.              C.A. Wang, H.T. Lin, M.L. Grossbeck, and B.A. Chin. “Suppression of HAZ Cracking During Welding of Helium-Containing Materials.” Journal of Nuclear Materials. Volume 193. pp. 696-700. 1992.

 

55.              C.K. Lee, B.A. Chin, S. Zinkle, and R.C. Wilcox. “Brazing of Copper-Alumina Alloys.” Journal of Nuclear Materials. Volume 191. pp.488-492. 1992.

 

56.              R.H. Zee, W.Y. Wu, and B.A. Chin. “Electrotransport and Radiation Effects in Alumina Insulators During High Temperature Reactor Applications.” Journal of Nuclear Materials. Volume 191-194. pp. 571-574. 1992.

 

57.              L. Santanam, S. Raghavan, H. Shaw, and B.A. Chin. “Zircaloy Cladding Rupture During Repository Storage.” Nuclear Technology. Volume 97. pp. 316-322. March, 1992.

 

58.              G.R. Rao, E.H. Lee, and B.A. Chin. “Ion Implantation Effects on Fatigue Properties of Fe-13Cr-15Ni Alloys.” Surface and Coatings Technology. Volume 51. pp.112-117. 1992.

 

59.              S. Nagarajan, P. Banerjee, W.H. Chen, and B.A. Chin. “Control of the Welding Process using Infrared Sensors.” International Electrical and Electronics Engineer Transactions on Robotics and Automation. Volume 8. Issue 1. pp. 86-93. February, 1992.

 

60.              L. Santanam, S. Raghavan, H. Shaw, and B.A. Chin. “Zircaloy Cladding Degradation Under Repository Conditions.” Nuclear Technology. Volume 97. pp. 316-322. March, 1992.

 

61.              H.T. Lin and B.A. Chin, “Helium Induced Weld Cracking in Austenitic and Martensitic Steels.” Journal of Materials Science. Volume 26. pp. 1-9. 1991.

 

62.              Y. Lin, R.H. Zee and, B.A. Chin. “Formation of Insitu Reinforcements of TiC in Ti Alloys.” Metallurgical and Metal Transactions A. Volume 22A. Issue 4. pp. 859-865. April, 1991.

 

63.              H.T. Lin and B.A. Chin. “Feasibility of Welding Irradiated Materials.” Journal of Nuclear Materials. Volume 179. pp. 1131-1135. 1991.

 

64.              G.R. Rao, A. Rowcliffe, and B.A. Chin. “Development of Miniature Fatigue Specimens for Structural Materials Testing.” Journal of Nuclear Materials. Volume 179. pp. 438-441. 1991.

 

65.              H. Wu and B. A. Chin. “Rapid Pressure Solidification in an Al-Si Alloy.” Journal of Materials Science. Volume 26. pp. 993-999. 1991.

 

66.              T.J. Miller, S.J. Zinkle, and B.A. Chin. “Strength and Fatigue of Dispersion-Strengthened Copper.” Journal of Nuclear Materials. Volume 179. pp. 263-269. 1991.

 

67.              C.C. Yang, R.H. Zee, Y. Lin, and B.A. Chin. “Effects of Boron and Heat Treatment on the Structure of Dual Phase Ti-TiC.” Journal of Materials Science. Volume 26. pp. 3853-3861. 1991.

 

68.              S. Nagarajan, P. Banerjee, and B.A. Chin. “Thermal Imaging to Control Weld Quality in Arc Welding.” Transport Phenomena in Materials Processing, American Society of Mechanical Engineers (ASME): Heat Transfer Division (HTD). Volume 146. pp. 171-178.

 

69.              S. Nagarajan and B.A. Chin. “IR Image Analysis for On-Line Monitoring of Arc Misalignment in Gas Tungsten Arc Welding Process.” Materials Evaluation. Volume 48. Issue 12. pp. 1469-1472. December, 1990.

 

70.              K.N. Groom, S. Nagarajan, and B.A. Chin. “Automatic Single V-Groove Welding Utilizing Infrared Images for Error Detection and Correction.” Welding Journal. Volume 69. Issue 12. pp. 441-446. December, 1990.

 

71.              H.T. Lin, M.L. Grossbeck, and B.A. Chin. “Cavity Microstructure and Kinetics during Gas Tungsten Arc Welding of Helium Containing Stainless Steel.” Metallurgical and Metal Transactions A. Volume 21A. pp. 2585-2596. September 1990.

 

72.              W.H. Chen and B.A. Chin. “Monitoring Weld Penetration Using Infrared Sensing Techniques.” Welding Journal. Volume 69. Issue 5. pp. 181-185. May 1990.

 

73.              S. Nagarajan, W.H. Chen, and B.A. Chin. “Infrared Sensing for Adaptive Arc Welding.” Welding Journal. Volume 68. Issue 11. pp. 462-466. November 1989.

 

74.              B.A. Chin and E.R. Gilbert. “Prediction of Maximum Allowable Temperatures for Dry Storage of Zircaloy-Clad Spent Fuel in Inert Atmosphere.” Nuclear Technology. Volume 85. pp 57-65. April, 1989.

 

75.              T.T. Lin, H.T. Lin, and B.A. Chin. “On-Line Control of Surface Contamination During Gas Tungsten Arc Welding.” Optical Engineering. Volume 27. pp. 413-419. May, 1988.

 

76.              E. R. Gilbert, B. A. Chin, and D. R. Duncan. “Effects of Irradiation of Failure Mode During Creep.” Metallurgical and Material Transactions A. Volume 18A. pp. 79-84. January, 1987.

 

77.              M. A. Khan, N. H. Madsen, J. S. Goodling, and B. A. Chin. “Infrared Thermography as a Control for the Welding Process.” Optical Engineering. Volume 25. pp. 799-805. June, 1986.

 

78.              R. F. Askew, B. A. Chin, B. J. Tatarchuk, J. L. Brown, and D. B. Jensen. “Rail and Insulator Erosion in Rail Guns.” Institute of Electrical and Electronics Engineers (IEEE) Transactions on Magnetics. Volume 22. pp. 1380-1385. November, 1986.

 

79.              H. T. Lin, R. C. Wilcox, and B. A. Chin. “The Effects of Strain Rate and Long-Term Aging on the Properties of (Fe, Ni)3V LRO Alloys.” Journal of Nuclear Materials. Volume 141-143. pp. 497-502. 1986.

 

80.              R. C. Wilcox and B. A. Chin. “Austenitizing and Microstructure of a HT-9 Steel.” Metallography. Volume 17. pp. 285-298. August, 1984.

 

81.              R. C. Wilcox and B. A. Chin. “The Effect of Tempering Treatment on the DBTT of Alloy HT-9.” Journal of Nuclear Materials. Volume 122-123. pp. 349-353. 1984.

 

82.              B. A. Chin and R. C. Wilcox. “The Effect of Strain Rate on the Properties of (Fe, Ni)3V Long Range Ordered Alloys.” Journal of Nuclear Materials. Volume 122-123. pp. 810-815. 1984.

 

83.              B. A. Chin, J. S. Goodling, and N. H. Madsen. “Infrared Thermography for Sensing the Weld Process.” Welding Journal. Volume 62. pp. 227-234. September, 1983.

 

84.              B. A. Chin, J. S. Goodling, and N. H. Madsen. “Infrared Thermography Shows Promise for Sensors in Robotic Welding.” Robotics Today. Volume 5. pp. 85-87. February 1983.

 

85.              B. A. Chin, R. J. Neuhold, and J. L. Straalsund. “U.S. Materials Development for Advanced Reactor Cores.” Nuclear Technology. Volume57. pp. 426-435. June 1982.

 

86.              J. L. Straalsund, R. W. Powel,l and B. A. Chin. “An Overview of Neutron Irradiation Effects in LMFBR Materials.” Journal of Nuclear Materials. Volume 108-109. pp. 299-305. July-August 1982.

 

87.              B. A. Chin and J. L. Straalsund. “Application of the Hart Mechanical Equation of State to Stress Rupture Correlations.” Materials Science and Engineering. Volume 47. pp. 121-131. February, 1981.

 

88.              M. Ermi, R. E. Bauer, and B. A. Chin. “Multispecimen Fatigue Crack Propagation Testing.” Journal of Engineering Materials and Technology. American Society of Mechanical Engineers Transactions. Volume 103. pp. 240-245. July, 1981.

 

89.              E. R. Gilbert and B. A. Chin. “In-Reactor Creep Measurements.” Nuclear Technology. Volume 52. pp. 273-283. February, 1981.

 

90.              R. A. Puigh, A. M. Ermi, and B. A. Chin. “Miniaturized Fatigue Crack Growth Specimen Technology and Results.” Journal of Nuclear Materials. Volume 103-104. pp. 1501-1505. June 11, 1981.

 

91.              M. Ermi and B. A. Chin. “In Situ Fatigue Crack Propagation Experiment.” Journal of Nuclear Materials. Volume 103-104. pp. 1505-1509. 1981.

 

92.              J. Lovell, B. A. Chin, and E. R. Gilbert. “In-Reactor Creep Rupture of 20% CW AISI 316 Stainless Steel.” Journal of Materials Science. Volume 16. pp. 870-876. April, 1981.

 

93.              M. M. Paxton, B. A. Chin, and E. R. Gilbert. “The In-Reactor Creep of Selected Ferritic Solid Solution Strengthened, and Precipitation Hardened Alloys.” Journal of Nuclear Materials. Volume 95. pp. 185-192. November, 1980.

 

94.              A. Chin and J. L. Straalsund. “Development of the Climb Induced Glide Concept to Describe In-Reactor Creep of FCC Materials.” Journal of Nuclear Materials. Volume 90. pp. 68-74. May, 1980.

 

95.              R.E. Bauer, R.H. Puigh and B.A. Chin.  “Miniaturized Mechanical Property Tests for Evaluating Fusion Reactor Materials,” Journal of Metals, Vol. 32, Issue 12, pp.19, 1980.

 

96.              J. Lovell, B. Y. Christensen and B. A. Chin. “Observations of IN-Reactor Endurance and Rupture Life for Fueled and Unfueled FTR Cladding.” Transactions of the American Nuclear Society. Volume 32. pp. 217-228. June, 1979.

 

97.              A. Chin, J. L. Straalsund, G. L. Wire. “Effects of Prior Stress History on Irradiation Creep of 20% CW AISI 316 Stainless Steel.” Journal of Nuclear Materials. Volume 83. pp. 324-329. 1979.

 

98.              M. M. Paxton, B. A. Chin, E. R. Gilbert and R. E. Nygren. “Comparison of the In-Reactor Creep of Selected Ferritic, Solid Solution Strengthened, and Precipitation Hardened Commercial Alloys.” Journal of Nuclear Materials. Volume 80. pp. 144-151. March, 1979.

 

99.              A. Chin and J. L. Straalsund. “The Effect of a Temperature Change on the In-Reactor Creep of 20% CW AISI 316 Stainless Steel.” Journal of Nuclear Materials. Volume 74. pp. 260-266. 1978.

 

100.          R. Gilbert and B. A. Chin. “In-Reactor Creep Measurement Techniques.” Transactions of the American Nuclear Society. Volume 28. pp. 141-152. June, 1978.

101.          B. A. Chin and J. L. Straalsund and G. L. Wire. “Irradiation Creep of Previously Irradiated 304 Stainless Steel in a Fast Flux Environment.” Journal of Nuclear Materials. Volume 75. pp. 274-281. August, 1978.

 

102.          B. A. Chin, W. D. Nix and G. M. Pound. “The Role of Diffusion in Determining the Controlling Creep Mechanism in A1-Zn Solid Solutions, Part II.” Metallurgical and Materials Transactions A. Volume 8A. pp. 1523-1530. October, 1977.

 

103.          B. A. Chin, G. M. Pound and W. D. Nix. “The Role of Diffusion in Determining the Controlling Creep Mechanisms in Al-Zn Solid Solutions, Part I.” Metallurgical and Materials Transactions A. Volume 8A. pp. 1517-1522. October, 1977.

 
 

Book Chapters

1.                  S. Li, R.S. Lakshmanan, and B.A. Chin, “Phage based Biosensors for the Detection of Pathogens,”  in Phage Applications, V. Petrenko, Ed., Elsevier, In press. 

 

2.                  S. Huang, R.S. Lakshmanan, J.M. Barbaree, and B.A. Chin, “General Detector Capabilities for Food Safety Applications,”  In Handbook of Science and Technology for Homeland Security, B. Resnick, ed., John Wiley and Sons, In Press.

3.                  H. Yang, H.C.Wikle, S. Nagarajan, M. Johnson, P. Banerjee, and B.A. Chin, “Infrared Sensors in Welding,” In Real-Time Weld Process Monitoring; Zhang, Y., Ed.; CRC Press: Boca Raton, FL; 2008, 74-128.

4.                  B.A. Chin. “Infrared Sensing for the Welding Process.” Nondestructive Testing Handbook. Infrared and Thermal Testing. Volume 3. pp. 458-462. 2001.

 

5.                  P. Banerjee and B. A. Chin. “Special Metallurgical Considerations when Welding Refractory Metals.” Welding Brazing and Soldering. American Society of Metals International Handbook. Volume 6. pp. 580-583. December 1993.

 

Refereed Conference Proceedings

 

1.                  F. Xie, H. Yang, M.L. Johnson, J.-H Wan, V.A. Petrenko, Z.-Y. Cheng, J.W. Hong, J.M. Barbaree, and. Chin, “Magnetoelastic Biosensors for the Detection of Spores,” the 3rd International Conference on Smart Materials, Structures and Systems, Acireale Sicily, Italy, June 8-13, 2008

 

2.                  S. Huang, H. Yang, M. Johnson, J. Wan, I. Chen, V. A. Petrenko, J. M. Barbaree, and B. A. Chin, “Optimization of Phage-Based Magnetoelastic Biosensor Performance,” NSTI nanotech 2008 conference, symposium on Phage Nanobiotechnology, Boston, MA, June 1-5, 2008

 

3.                  J. Wan, S. Li, F. Xie, M. Johnson, H. Wikle, V. Petrenko, J. Barbaree and B. A. Chin, “Phage-based Biorecognition Interfaces in Biosensors,” NSTI nanotech 2008 conference, symposium on Phage Nanobiotechnology, Boston, MA, June 1-5, 2008

 

4.                  J. Wan, M.L. Johnson, S. Horikawa, V.A. Petrenko, B.A. Chin, “Characterization of phage-coupled magnetoelastic micro-particles for the detection of Bacillus Anthracis Sterne spores,” Sensors IEEE 2007 Proceedings, 28-31 October 2007, p 1085-1088

 

5.                  S. Huang, H. Yang, M. Johnson, and B.A. Chin, “Phage-based Magnetoelastic Biosensor for Characterizing the Effect of Salt Concentrations on Filamentous Phage,” Sensors IEEE 2007 Proceedings, 28-31 October 2007, p 1093-1096.

 

6.                  S. Huang, H. Yang, M. Johnson, I. Chen, V. A. Petrenko, and B. A. Chin, “Simultaneous Detection of Salmonella typhimurium and Bacillus anthracis Spores Using Phage-Based Magnetoelastic Biosensors”, NSTI Nanotech 2007, Technical Proceedings, 2007, p 515-518

 

7.                  J. Wan, M. Johnson, V. A. Petrenko, and B. A. Chin. “Microfabricated Wireless Magnetostrictive Particles for the Detection of Biological Warfare Agents,” Proceedings of Materials Research Society Fall Meeting, 0951-E06-31 Dec. 2006.

 

8.                  Huihua Shu, Jiehui Wan, John Shu, Hong Yang, and Bryan A. Chin, “Fabrication and Characterization of a Poly (3-Hexylthiophene) Thin Film Micro-sensor for Hypergolic Vapor Detection,” Proceedings of Materials Research Society Fall Meeting, 0951-E06-32 Dec. 2006

 

9.                  H. Fan, H. Yang, N.K. Ravala, H.C. Wikle, R.H. Zee and B.A. Chin, “Hafnium Carbide Structural Foams Synthesized from Polymer Precursors,” Invited Paper, Transactions of Nonferrous Metals Society, Vol 16, pp.85-88, Sept 2006.

 

10.              Huihua Shu, John Shu, Jiehui Wan, Hong Yang, Bryan A. Chin, “The Application of Conductive Poly (3-Hexylthiophene) Thin Film for Hydrazine-Sensitive Chemiresistor,” Materials Science and Technology Conference, October 15-19, 2006. In Press

 

11.              M.L. Johnson, J. Hu, J. Wan, R.S. Lakshmanan, V.A. Petrenko, and B.A. Chin. “A Remote Biosensor Platform Using Sputtered Magnetostrictive Particles.” Proceedings of the Fifteenth Annual Symposium for the Processing and Fabrication of Advanced Materials, Materials Science and Technology Conference. October 15-19, 2006. In Press

 

12.              H. Yang, J. Wan, H. Shu, X. Liu, R.S. Lakshmanan, H.C. Wikle, and B.A. Chin, “Hydrazine Leak Detection Using Poly (3-hexylthiophene) Thin Film Microsensor,” Sensors for Propulsion Measurement Applications, SPIE Vol. 6222, pp. 251-258, May, 2006.

 

13.              Ramji S Lakshmanan, Jing Hu, Rajesh Guntupalli, Jiehui Wan, Shichu Huang, Hong Yang, Valery A. Petrenko, James M Barbaree, and Bryan A. Chin, “Detection of Salmonella typhimurium using a Phage-Based Magnetostrictive Sensor,” Chemical and Biological Sensing VII, SPIE Vol. 6218, pp. 246-255, May, 2006.

 

14.              R. Guntupalli, Jing Hu, Ramji S. Lakshmanan, Jiehui Wan, Shichu Huang, Hong Yang, James M. Barbaree, T. S. Huang, and Bryan A. Chin. “Detection of Salmonella typhimurium using polyclonal antibody immobilized magnetostrictive biosensors.” Sensors, and Command, Control, Communications, and Intelligence (C3I) Technologies for Homeland Security and Homeland Defense. SPIE Vol. 6201, pp 220-228, May 2006.

 

15.              J. Wan, H. Yang, R. S. Lakshmanan, R. Guntupalli, S. Huang, J. Hu, V. A. Petrenko, and B.A. Chin. “Phage-based Magnetostrictive-Acoustic Microbiosensors for Detecting Bacillus anthracis Spores.” Micro (MEMS) and Nanotechnologies, SPIE Volume 6223. pp.98-106, May, 2006.

 

16.              V.A. Petrenko, J. Barbaree, J. Brigati, I-H. Chen, B. Chin, G. Kouzmitcheva, E. Olsen, I.B. Sorokulova, J. Sykora, and V. Vodyanoy. “Biosensitive Detection Probes on a Basis of Fused Phages and Their Stripped Recombinant Proteins.” Proceedings of Pittcon Orlando, Florida. March 12-17, 2006.

 

17.              V. A. Petrenko, J. Brigati, J. Sykora, E. Olsen, I.B. Sorokulova, G. Kouzmitcheva, I-H Chen, J. Barbaree, B. Chin and V. Vodyanoy. “Landscape Phages and Their Stripped Proteins as Self Assembling Affinity Reagents for Medicine and Technology.” Invited Paper, published in European NANO SYSTEMS 2005, Paris, France, pp.81-86, 2006.

 

18.              V.A. Petrenko, E.V. Olsen, J.C. Sykora, G.A. Kouzmitcheva, I.B. Sorokulova, J.R. Brigati, I-H. Chen, B.A. Chin, and V.J. Vodyanoy. “Nanofabrication of Bioselective Materials using Diverse Nanolandscapes Displayed on Live Viruses.” Technical Proceedings of the 2005 Nano Science and Technology Institute Nanotechnology Conference and Trade Show. Nanotech. Volume 1. pp. 262-265. Dec. 2005.

 

19.              J. Wan and B. A. Chin. “Characterization and Application of Wireless Magnetostrictive Micro-sensors,” IEEE Sensors Proceedings 2005, pp. 24-27, October, 2005.

 

20.              J. Wan, B. Fiebor, I-H. Chen, J. Brigati, V. Petrenko, and B.A. Chin. “Landscape Phage-Based Magnetostrictive Biosensor for Detecting Bacillus anthracis Spores.” IEEE Sensors Proceedings 2005, pp 1308-1311, October, 2005.

 

21.              H. Fan, N.K. Ravala, H. C. Wikle-III, and B.A. Chin. “HfC Structural Foams,” Proceedings of the 107th American Ceramics Society Annual Meeting. pp. 1-13. April 10, 2005.

 

22.              H. Yang and B.A. Chin. “Conducting Polymer Based Micro-sensor for Real-Time Detection of Hydrazine Leakage.” Proceedings of the 204th Electro-Chemical Society Meeting 1463. Orlando, Florida. March 2004.

 

23.              H. Yang and B.A. Chin. “Response of Poly(3-Hexylthiophene) Thin Film Chemi-resistor Sensor to Hydrazine Vapor.” Proceedings of The TMS Extraction and Processing Division, pp. 127-132. 2004.

 

24.              N. K. Ravala, H. Fan, H. C. Wikle III, B. A. Chin. “Modeling and Sensing for Penetration Control of the SAW Process In the Presence of Welding Perturbations.” American Society of Mechanical Engineers. Heat Transfer/Fluids Engineering Summer Conference, HT-FED2004-56341, Charlotte, North Carolina, pgs 8, 2004.

 

25.              J. Wan and B. A. Chin. “Sensor Applications of Piezoelectric Bimorph Cantilevers with High Sensitivity.” Proceedings of the 204th Electro-Chemical Society Meeting. Orlando, Florida. October 15, 2003.

 

26.              S. Nambi, S. Nyalamadugu, S.M. Wentworth, and B.A. Chin, “Radio Frequency Identification Sensors for Food Safety.” Wireless Communications Systems and Circuits Design in the 7th World Multi-Conference on Systemics, Cybernetics, and Informatics. Orlando, Florida. pp. 386-390, July 27-30, 2003.

 

27.              C. Bailey, B. Fiebor, W. Yan, B. A. Chin, and R. W. Cernosek. “Biosensing Using Thickness Shear Mode Quartz Resonators-Viscoelastic Film With Liquid Overlayer Analysis.” Proceedings of the Institution of Electrical and Electronics Engineers 2781. Orlando, Florida. 2002.

 

28.              R. W. Cernosek, C. A. Bailey, B. A. Chin, and V. Vodyanoy. “Investigation of Surface Interactions for Shear Acoustic Wave Device Immunosensors.” Materials Research Society Symposium. Philadelphia, Pennsylvania. 2002.

 

29.              R. W. Cernosek, C. Bailey, B. A. Chin, A. Rumpf, and S. Martin. “The Effects of Liquid-Solid Suspensions on TSM Resonator Response: Consequences for Biosensing Using Shear Mode Acoustic Devices.” Proceedings of Acoustic Wave Sensors Workshop. Taos, New Mexico. 2001.

 

30.              R. W. Cernosek, B.A. Chin, J.M. Barbaree, V. Vodyanoy, D.E. Conner, an Y-H.P. Hsieh. “A Rapid Biosensing System for Detecting Food-Borne Pathogens.” Proceeding of the Sensors Expo. Chicago, IL. pp. 113-116. 2001.

 

31.              C. Bailey, B. Fiebor, W. Yan, V. Vodyanoy, R. Cernosek, and B.A. Chin. “Thickness Shear Mode Resonator Platform Used For Biosensing.” Editors: J. Jensen and L. Burggraf. SPIE Vol 4575, Chemical and Biological Early Warning Monitoring for Water, Food, and Ground, pp. 138-149. February, 2002.

 

32.              H. C. Wikle III, S. Kottilingam, and B. A. Chin. “Penetration Depth Control Using Point Infrared Sensors.” Proceedings of the Atlanta Meeting of the American Society of Mechanical Engineers. September 7, 2000.

 

33.              R.H. Zee, Z. Xiao, H.S. Gale, B.A. Chin, and L.L. Begg. “Processing of Tungsten Single Crystals by Chemical Vapor Deposition.” Electrochemical Society Proceedings. Volume 13. pp. 571-578. 2000.

 

34.              C. A. Wang, H. C. Wikle III, M. L. Grossbeck, and B.A. Chin. “Stress-Modified Welding of Neutron Irradiated Steels.” Editors: M.L. Hamilton, A.S. Kumar, S.T. Rosinske and M.L. Grossbeck. Effects of Radiation on Materials, 19th International Symposium. American Society of Testing and Materials Standards. Volume 1366. pp. 935-943. 2000

 

35.              C. Zhang, P. Toma, B. A. Chin, and R. Zee. “Transformation Behavior in NiTi-Based Shape Memory Alloys.” Editors: L. Zhou, D. Eylon, G. Lutjering, and C. Guchi. Titanium 98. International Academic Publishers. Volume 2. pp. 1049-1054. 1999.

 

36.              C. Zhang, P. Toma, B. A. Chin, and R. Zee. “Martensitic and R-Phase Transformations in Ni-Ti and Ni-Ti-Hf.” Invited paper, Transactions of Nonferrous Metals Society. China, Volume 9. Supplement 1. pp. 55-64. June, 1999.

 

37.              S. Kottilingam and B.A. Chin. “Real Time Monitoring and Control of Weld Penetration for Submerged Arc Welding Process.” Trends in Welding Research. pp. 1141-1146. June, 1999.

 

38.              S.F. Chen, T. Bao, H.C. Wikle III, and B.A. Chin. “Brazing of a Dispersion Strengthened Copper Alloy.” Trends in Welding Research. pp. 646-650. June, 1999.

 

39.              N.B. Potluri, H. Aglan, B.A. Chin. “Investigation on the Embrittlement of V-4Cr-4Ti Alloy During Fusion Welding.” Trends in Welding Research. pg. 898-903. June, 1999.

 

40.              F. Chen, H.C. Wikle III, and B.A. Chin. “GTAW Penetration Control Using a Point Infrared Sensor” Trends in Welding Research. pp. 1108-1112. June, 1999.

 

41.              F. Chen, H.C. Wikle, R.C. Wilcox, and B.A. Chin. “Sensing and Control System for Gas Tungsten Arc Weld Penetration.” Proceedings of the International Conference, Control 97. pp. 272-276. 1997.

 

42.              S. Raghavan and B.A. Chin. “Nickel Aluminide-Copper Backing for Butt Joint Welding.” Trends in Welding Research. American Society of Metals International. pp.335-340. 1996.

 

43.              S.M. Govardhan, H.C. Wikle, S. Nagarajan and B.A. Chin, “Real-time Welding Process Control Using Infrared Sensing,” IEEE American Control Conference, Vol. 3, pp. 1712-1716, June 1995.

 

44.              H. C. Wikle III, S. M. Govardhan, and B. A. Chin. “Point Temperature Sensing Technique for Submerged Arc Welding.” Proceedings of International Conference on Modeling and Control of Welding Processes. American Control Institute. Seattle, Washington. pp. 1515-1520. June, 1995.

 

45.              J. Cohron, Y. Ozaki, R.H. Zee, and B.A. Chin. “Reactivity of Refractory Carbides with Hot Hydrogen.” Editors: M.S. El-Genk and M.D. Hoover. Proceedings of the Eleventh Symposium on Space Nuclear Power and Propulsion. American Institute of Physics Proceedings 301. Albuquerque, NM. pp. 939-944. January, 1994.

 

46.              C.A. Wang, H.T. Lin, M.L. Grossbeck, and B.A. Chin. “Helium-Induced Weld Degradation of HT-9 Steel.” Editors: A.S. Kumar, et al. Effects of Radiation on Materials: 16th International Symposium. American Society of Testing and Materials Standards. Volume 1175. Philadelphia, Pennsylvania. pp. 789-802. January, 1994.

 

47.              C.K. Lee, B.A. Chin, S.J. Zinkle, and R.C. Wilcox. “Mechanical Properties of Induction Brazed Glidcop Al-15.” Editors: A.S. Kumar, et al. Effects of Radiation on Materials: 16th International Symposium. American Society of Testing and Materials Standards. Volume 1175. Philadelphia, Pennsylvania. pp. 1026-1040. January, 1994.

 

48.              W. Wu, B.A. Chin, and R.H. Zee. “Radiation Induced Mechanical Stresses in Polycrystalline Alumina Insulators.” Editors: A.S. Kumar, et al. Effects of Radiation on Materials: 16th International Symposium. American Society of Testing and Materials Standards. Volume 1175. Philadelphia, Pennsylvania. pp. 1242-1254. January, 1994.

 

49.              C.A. Wang, M.L. Grossbeck, and B.A. Chin. “Technique to Eliminate Helium Induced Weld Cracking in Stainless Steels.” Editors A.S. Kumar, et al. Effects of Radiation on Materials: 16th International Symposium. American Society of Testing and Materials Standards. Volume 1175. Philadelphia, Pennsylvania. pp. 779-788. January, 1994.


50.              N. Sundaram and B. A. Chin. “Infrared Techniques for Real-Time Weld Quality Control.” Editor: X. Maldague. International Advances in Nondestructive Testing Monograph Series-Monograph entitled: Infrared Techniques for Nondestructive Testing. Gordon and Beach Publishers. pp. 367-396. 1994.

 

51.              P. Banerjee, S. Govardhan, and B.A. Chin. “Infrared Sensing for On-Line Weld Process Monitoring and Control.” Proceedings of 1993 Society for Experimental Mechanics Conference. Dearborn, MI. pp.1-9. June 7-9, 1993.

 

52.              S. M. Govardhan and B. A. Chin. “Adaptive Penetration Control Using Infrared Measured Temperature Gradients.” Proceedings of Thermosense XV, The International Society of Optical Engineers (SPIE) International Conference on Thermal Sensing and Imaging Diagnostic Applications. Orlando, FL. pp. 93-101. April 14-16, 1993.

 

53.              P. Banerjee and B. A. Chin. “Infrared Sensor-based On-Line Weld Penetration Control.” Proceedings of Thermosense XV, The International Society of Optical Engineers (SPIE) International Conference on Thermal Sensing and Imaging Diagnostic Applications. Orlando, FL. pp. 83-92. April 14-16, 1993.

 

54.              S. Raghavan, H. C. Wikle, and B. A. Chin. “Adaptive Control of Arc Welding Using Infrared Sensing.” Proceedings of Thermosense XV, The International Society of Optical Engineers (SPIE) International Conference on Thermal Sensing and Imaging Diagnostic Applications. Orlando, FL. pp. 76-82. April 14-16, 1993.

 

55.              C. A. Wang, M. L. Grossbeck, and B. A. Chin. “Stress Modified Welding Process for Post-Irradiated Materials.” Editors: S.A. David and J.M. Vitek. International Trends in Welding Science and Technology. American Society of Metals International. Metals Park, OH. pp. 439-443. 1993.

 

56.              S. M. Govardhan and B. A. Chin, “Monitoring Penetration Changes Resulting from Gas Composition Variations.” Editor: S.A. David and J.M. Vitek. International Trends in Welding Science and Technology. American Society of Metals International. Metals Park, OH. pp. 611-615. 1993.

 

57.              P. Banerjee and B. A. Chin. “Gradient Technique for Dynamic Bead Width Control in Robotic Gas Tungsten Arc Welding.” Editors: S.A. David and J.M. Vitek. International Trends in Welding Science and Technology. American Society of Metals International. Metals Park, OH. pp. 937-942. 1993.

 

58.              P. Banerjee, J. Liu, and B.A. Chin. “Infrared Thermography for Non-Destructive Monitoring of Weld Penetration Variations.” Editor: Ming Leu. Proceedings of Japan USA Symposium on Flexible Automation. Book Number IO338A. American Society of Mechanical Engineers. pp. 291-295. 1992.

 

59.              G.R. Rao and B.A. Chin. “Development of a Miniature-Disk Bending Fatigue Specimen.” American Society of Testing and Materials Standards symposium 1175 on Small Specimen Test Techniques and their Application to Nuclear Reactor Vessel Thermal Annealing and Plant Life Extension. New Orleans, Louisiana. January 28-30, 1992.

 

60.              J.Y. Liu, P. Banerjee, and B.A. Chin. “The Effect of Minor Tramp Elements on Temperature Distributions of the Molten Pool.” Editor: S.A. David and J.M. Vitek. International Trends in Welding Science and Technology. American Society of Metals International. Metals Park, OH. pp. 703-707. 1993.

 

61.              W. Yu, S. Chen, R.H. Zee, and B.A. Chin. “Properties of Nb-1Zr to Stainless Steel Extruded Transition Joints.” Editors: S.A. David and J.M. Vitek. International Trends in Welding Science and Technology. American Society of Metals International. Metals Park, OH. pp. 611-615. 1993.

 

62.              S. Nagarajan and B.A. Chin. “On-Line Identification and Control of Part-Preparation and Fixturing Errors in Arc Welding.” Proceedings of 112th American Society of Mechanical Engineers Winter Annual Meeting. Atlanta, GA. December 1-6, 1991.

 

63.              G.R. Rao and B.A. Chin. “Miniaturized Fatigue Specimen Development for Fusion Structural Materials Applications.” Editors: R.E. Stoller, A.S. Kumar, and D.S. Gelles. Effects of Radiation on Materials. American Society of Testing and Materials Standards. Volume 1175. pp. 1095-1102. August 1992.

 

64.              X. Lin, C.C. Yang, R.H. Zee, and B.A. Chin. “Insitu Formation of TiC Reinforced TiAl, Ti3Al and Alpha Ti Alloys.” Proceedings of the 1990 International Materials Research Conference. Beijing, China. Materials Research Society. pp. 346-353. June 1990.

 

65.              B.A. Chin, Y. Lin, and R.H. Zee. “Novel 3-D Reinforced TiAl and Alpha Ti Alloys.” Proceedings of International Symposium on Intermetallic Compounds-Structure and Mechanical Properties. Japan Institute of Metals (JIMIS-6). pp. 967-971. 1991.

 

66.              S. Chen, R.H. Zee, and B.A. Chin. “Refractory Metal to Stainless Steel Joints.” Proceedings of International Energy Conversion Engineering Conference, IECEC-91. Society of Automotive Engineers /American Nuclear Society. pp. 185-189. August, 1991.

 

67.              S. Nagarajan, P. Banerjee, and B.A, Chin. “Infrared Sensors for Robotic Welding.” Proceedings of the International Automation Conference and Show. Robotic Industries Association. Detroit, Mi. pp. 14.49-14.60. June 4, 1990.

 

68.              S. Nagarajan, P. Banerjee, and B.A. Chin. “Weld Pool Size and Position Control Using IR Sensors.” Proceedings of the NSF Design and Manufacturing Systems Conference. Society of Manufacturing Engineers. Dearborn, MI. Tempe, AZ. pp. 607-615. January 1990.

 

69.              W.H. Chen, P. Banerjee, and B.A. Chin. “Study of Penetration Variations in Automated Gas Tungsten Arc Welding.” Editors: S.A. David and J.M. Vitek. Recent Trends in Welding Science and Technology. American Society for Metals (ASM) International. Materials Park, OH. pp. 517-522. 1990.

 

70.              S. Nagarajan, K.N. Groom, and B.A. Chin. “Infrared Sensors for Seam Tracking in Gas Tungsten Arc Welding Processes.” Editors, S.A. David and J.M. Vitek. Recent Trends in Welding Science and Technology. American Society for Metals (ASM) International. Materials Park, OH. pp. 951-956. 1990.

 

71.              S.M. Govardhan and B.A. Chin. “Monitoring GTA Weld Puddle Geometry Using Measured Surface Temperature Gradients.” Editors: S.A. David and J.M. Vitek. Recent Trends in Welding Science and Technology. American Society for Metals (ASM) International. Materials Park, OH. pp. 383-386. 1990.

 

72.              H.T. Lin, M.L. Grossbeck, S.H. Goods, and B.A. Chin. “Welding of Helium Doped Austenitic and Ferritic Stainless Steels.” Editors: S.A. David and J.M. Vitek. Recent Trends in Welding Science and Technology. American Society for Metals (ASM) International. Materials Park, OH. pp. 615-618. 1990.

 

73.              H.T. Lin, S.H. Goods, and B.A. Chin. “Helium Induced Degradation in the Weldability of an Austenitic Stainless Steel.” Effects of Radiation on Materials. American Society of Testing and Materials Standards. Volume 1046. pp. 301-314. 1990.

 

74.              L. Santanam, H. Shaw, and B.A. Chin. “Modeling of Zircaloy Cladding Degradation Under Repository Conditions.” Proceedings of Focus 89 - Nuclear Waste Isolation in the Unsaturated Zone. Las Vegas, NV. American Nuclear Society (ANS). pp. 41-46. September 17-21, 1989.

 

75.              L. Santanam, H. Shaw, and B.A. Chin. “Zircaloy Cladding Degradation During Repository Storage.” Editor: D. Cubiccioti. Environmental Degradation of Materials in Nuclear Power systems-Water Reactors. Fourth International Symposium on Environmental Degradation of Materials. Jekyll Island, GA.. National Association of Corrosion Engineers (NACE). pp. 1038-1046. August, 1989.

 

76.              J. Chen, Z. Geng, asnd B.A. Chin. “The Effect of Al Additions on the Properties of Ti-TiC Dual Phase Systems.” Materials Research Society. Volume 133. pp. 447-452. 1989.

 

77.              H.T. Lin, M.L. Grossbeck, S.H. Goods, and B.A. Chin. “Welding of He-Doped Stainless Steel to Simulate Repair of Nuclear Power Reactors.” Proceedings of the Symposium on Nuclear Power Plant Aging. Gaitherburg, MD. August 30, 1988.

 

78.              W.H. Chen, S. Nagarajan, and B.A. Chin. “Weld Penetration Sensing and Control.” Infrared Technology XIV. International Society for Optical Engineers (SPIE). Volume 972. pp. 286-272. August, 1988.

 

79.              S. Nagarajan, W.H. Chen, and B.A. Chin. “Thermal Image Analysis Techniques for Seam Tracking in Arc Welding.” Infrared Technology XIV. International Society for Optical Engineers (SPIE). Volume 972. pp. 256-267. August, 1988.

 

80.              S. Nagarajan, W. Chen, K. Groom, and B.A. Chin. “Infrared Sensors for Seam Tracking and Penetration Depth Monitoring in GTAW.” Optical Testing and Metrology II. International Society for Optical Engineers (SPIE). Volume 954. pp. 568-573. June, 1988.

 

81.              K. Groom, S. Nagarajan, and B.A.Chin. “Seamtracking During Gas Tungsten Arc Welding Using Measured Surface Temperature Gradients.” Modeling of Casting and Welding Processes IV. Engineering Foundation. pp. 721-730. 1988.

 

82.              R.C. Wilcox, K.C. Yeh, B.Z. Jang, and B.A. Chin. “Ordered C-Ti Alloys.” Proceedings of the Conference on Emerging Technologies in Materials. American Institute of Chemical Engineers. Minneapolis, MN. August 18-20, 1987.

 

83.              H. T. Lin, R. C. Wilcox, and B. A. Chin, “The Effect of Strain Rate on the Yield Behavior of Iron-Base LRO Alloys at Elevated Temperatures.” High-Temperature Ordered Intermetallic Alloys. Materials Research Society. Volume 81. pp. 235-240. 1987.

 

84.              H. T. Lin, R. C. Wilcox, and B. A. Chin. “The Effects of Temperature and Strain Rate on the Properties of(Fe, Ni)3V LRO Alloys.” Influence of Irradiation on Material Properties. American Society of Testing and Materials Standards. Volume 956. pp 310-318. 1987.

 

85.              T. T. Lin, K. Groom, Y. Wang, J. S. Goodling, and B. A. Chin. “Adaptive Welding Using Infrared Sensing techniques.” Manufacturing Processes, Machines and Systems. Dearborn, MI. Society of Manufacturing Engineers. pp. 21-29. November, 1986.

 

86.              Y. Wang and B. A. Chin. “On-Line Sensing of Weld Penetration Using Infrared Thermography.” Optical Techniques for Industrial Inspection. International Society for Optical Engineering (SPIE). Volume 665-34. pp. 314-320. June, 1986.

 

87.              C. L. Tarn, N. H. Madsen, and B. A. Chin. “Predictions of Dry Storage Behavior of Zircaloy Clad Spent Fuel Using Deformation and Fracture Map Analysis.” Third International Spent Fuel Storage Technology Symposium, Department of Energy Conference 860417. pp. S279-313. April, 1986.

 

88.              T. T. Lin, K. Groom, N. H. Madsen, and B. A. Chin. “Infrared Sensing Techniques for Adaptive Robotic Welding.” Modeling and Control of Casting and Welding Processes Conference. The Minerals, Metals, and Materials Society. pp. 19-32. January, 1986.

 

89.              N. F. Panayotou, S. D. Atkin, R. J. Puigh, and B. A. Chin. “Design and Use of Nonstandard Tensile Specimens for Irradiated Materials Testing.” The Use of Small-Scale Specimens for Testing Irradiated Materials. American Society of Testing and Materials Standards. Volume 888. pp. 201-219. 1986.

 

90.              N.H. Madsen, T.T. Lin, and B.A. Chin. “Infrared Sensors for Weld Process Control.” Advanced Systems for Manufacturing Conference Proceedings for the Society of Manufacturing Engineers (SME). pp. 335-345. 1985.

 

91.              B. A. Chin and N. H. Madsen. Automatic Welding, “Infrared Sensors for Process Control.” Advanced Automation. Institute of Electrical and Electronics Engineers (IEEE). Plenum Publishing, New York. pp. 411-429. 1985.

 

92.              B. A. Chin, N. H. Madsen, and M. A. Khan. “Fracture Predictions in Zircaloy Fuel Cladding.” Effects of Radiation on Materials: Twelfth International Symposium. American Society of Testing and Materials Standards. Volume 870. pp. 642-655. 1985.

 

93.              E. R. Gilbert and B. A. Chin. “Non-Isothermal Irradiation Creep of Nickel Alloys Inconel 706 and PE-16.” Effects of Radiation on Materials: Twelfth International Symposium. American Society of Testing and Materials Standards. Volume 870. pp. 85-93. 1985.

 

94.              B. A. Chin and E. R. Gilbert. “Influence of a Temperature Change on In-Reactor Creep.” Effects of Radiation on Materials: Twelfth Symposium. American Society of Testing and Materials Standards. Volume 870. pp. 38-51. 1985.

 

95.              B. A. Chin and N. H. Madsen. “Infrared Sensors for Process Control.” Proceedings of Eleventh Conference on Production Research and Technology. pp. 85-89. May 21-24, 1984.

 

96.              B. A. Chin. “An Analysis of the Creep Properties of a 12CR-1Mo-W-V Steel.” Ferritic Steels for Use in Nuclear Energy Applications. American Institute of Mining, Metallurgical, and Petroleum Engineers (AIME). Editors: J. W. Davis and D. J. Michel. pp. 593-601. 1984.

 

97.              B. A. Chin and R. C. Wilcox. “The Effect of Heat Treatment on the Impact Properties of a 12Cr-1Mo-V-W Steel.” Ferritic Steels for Use in Nuclear Energy Applications. American Institute of Mining, Metallurgical, and Petroleum Engineers (AIME). Editors: J. W. Davis and D. J. Michel. pp. 347-357. 1984.

 

98.              B. A. Chin, N. H. Madsen, and M. A. Khan. “Application of Zircaloy Deformation and Fracture Maps to Predicting Dry Spent Fuel Storage Conditions.” Proceedings of Spent Fuel Cladding Reaction During Dry Storage Workshop at Gaithersburg, Maryland. United States Nuclear Regulatory Commissions Regulation (NUREG) CO-0049. pp. K1-39. August 17-18, 1983.

 

99.              M. A. Khan, N. H. Madsen, and B. A. Chin. “Infrared Thermography as a Control for the Welding Process.” Thermal Infrared Sensing for Diagnostics and Control. The International Society for Optical Engineering (SPIE). Volume 446. pp. 154-165. January, 1983.

 

100.          B. A. Chin, N. H. Madsen, J. S. Goodling, and B. Z. Jang. “Automatic Welding: Infrared Thermography for Sensing the Weld Process.” Proceedings of the International Conference on Advanced Automation. Taipei, Taiwan. pp. 331-342. 1983.

 

101.          B. A. Chin. “Influence of Irradiation on the Mechanism of Crack Propagation During Creep.” Time-Dependent Failure Mechanisms and Assessment Methodologies. pp. 3-11. April, 1982.

 

102.          R. J. Puigh, B. A. Chin, and E. R. Gilbert. “An In-Reactor Creep Correlation for 20% Cold Worked AISI 316 Stainless Steel.” Effects of Radiation on Materials. American Society of Testing and Materials Standards. Volume 782. pp.108-121. 1982.

 

103.          B. A. Chin and R. J. Puigh. “An Analysis of the Creep Behavior of two Precipitation Strengthened Steels.” Effects of Radiation on Materials. American Society of Testing and Materials Standards. Volume 782. pp. 122-135. 1982.

 

104.          E. R. Gilbert and B. A. Chin. “Irradiated Materials Measurement Technology.” Effects of Radiation on Materials. American Society of Testing and Materials Standards. Volume 725. pp. 665-679. 1981.

 

105.          B. A. Chin, E. R. Gilbert, M. M. Paxton and J. L. Straalsund. “In-Reactor Creep Behavior of Selected Commercial Alloys at 595 C.” 9th ASTM International Symposium on Radiation Effects on Structural Materials. 1978.

 

106.          E. R. Gilbert, A. J. Lovell and B. A. Chin. “High Temperature In-Reactor Creep of 20% CW FTR Cladding.” 9th ASTM International Symposium on Radiation Effects of Structural Materials. 1978.