IEEE Transactions on Industrial Electronics 

Volume 38,  Number 1, Feb 1991           Access to the journal on IEEE XPLORE     IE Transactions Home Page



38.1.1    H. Dai, N.K. Sinha, "Robust recursive instrumental variable method with modified weights for bilinear system identification," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 1-7, Feb 1991.   Abstract Link    Full Text

38.1.2    M.A. Manzoul, "Interrupt-driven microprocessor-based overcurrent relay," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 8-9, Feb 1991.   Abstract Link    Full Text

38.1.3    F. Chen, C.S. Chen, "A 20 b dynamic-range floating-point data acquisition system," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 10-14, Feb 1991.   Abstract Link    Full Text

38.1.4    H. Arai, S. Tachi, "Position control system of a two degree of freedom manipulator with a passive joint," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 15-20, Feb 1991.   Abstract Link    Full Text

38.1.5    T.C.S. Hsia, T.A. Lasky, Z. Guo, "Robust independent joint controller design for industrial robot manipulators," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 21-25, Feb 1991.   Abstract Link    Full Text

38.1.6    Dong Sang Yoo, Myung Jin Chung, Zeungnam Bien, "Real-time implementation and evaluation of dynamic control algorithms for industrial manipulators," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 26-31, Feb 1991.   Abstract Link    Full Text

38.1.7    Marn Go Kim, Myung Joong Youn, "A discrete time domain modeling and analysis of controlled series resonant converter," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 32-40, Feb 1991.   Abstract Link    Full Text

38.1.8    M.P. Kazmierkowski, W. Sulkowski, "A novel vector control scheme for transistor PWM inverter-fed induction motor drive," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 41-47, Feb 1991.   Abstract Link    Full Text

38.1.9    C. Frangos, Y. Yavin, "Current controller design for an electromagnetic actuator using an online parameter optimization approach," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 48-50, Feb 1991.   Abstract Link    Full Text

38.1.10    S. Saadate, R. Le Doeuff, R. Periot, "Design of a high-voltage GTO chopper for traction drive," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 51-56, Feb 1991.   Abstract Link    Full Text

38.1.11    M. Morimoto, S. Sato, K. Sumito, K. Oshitani, "Voltage modulation factor of the magnetic flux control PWM method for inverter," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 57-61, Feb 1991.   Abstract Link    Full Text

38.1.12    W. Ahmad, "Biphase amplifier for precision controlled rectification and polar logic operations," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 62-64, Feb 1991.   Abstract Link    Full Text

38.1.13    F.H.F. Leung, P.K.S. Tam, C.K. Li, "The control of switching DC-DC converters-a general LWR problem," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 65-71, Feb 1991.   Abstract Link    Full Text

38.1.14    M. Kazerani, P.D. Ziogas, G. Joos, "A novel active current waveshaping technique for solid-state input power factor conditioners," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 72-78, Feb 1991.   Abstract Link    Full Text

38.1.15    R. Simard, A. Cheriti, T.A. Meynard, K. Al-Haddad, V. Rajagopalan, "An EPROM-based PWM modulator for a three-phase soft commutated inverter," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 79-81, Feb 1991.   Abstract Link    Full Text

38.1.16    R.E. Zulinski, K.J. Herman, J.C. Mandojana, "The infeasibility of constant output power in a constant-current-fed class-E power inverter," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 81-82, Feb 1991.   Abstract Link    Full Text

IEEE Transactions on Industrial Electronics

  IEEE Transactions on Industrial Electronics 

Volume 38,  Number 2, April 1991           Access to the journal on IEEE XPLORE     IE Transactions Home Page



38.2.1    Y.-S. Lee, D.K.W. Cheng, Y.C. Cheng, "Design of a novel AC regulator," IEEE Trans. on Industrial Electronics, vol. 38, no. 2, pp. 89-94, April 1991.   Abstract Link    Full Text

38.2.2    S.K. Panda, G. Amaratunga, "Comparison of two techniques for closed-loop drive of VR step motors without direct rotor position sensing," IEEE Trans. on Industrial Electronics, vol. 38, no. 2, pp. 95-101, April 1991.   Abstract Link    Full Text

38.2.3    K.-W. Lim, T.-S. Low, M.F. Rahman, L.-B. Wee, "A discrete time variable structure controller for a brushless DC motor drive," IEEE Trans. on Industrial Electronics, vol. 38, no. 2, pp. 102-107, April 1991.   Abstract Link    Full Text

38.2.4    Seung-Gi Jeong, Min-Ho Park, "The analysis and compensation of dead-time effects in PWM inverters ," IEEE Trans. on Industrial Electronics, vol. 38, no. 2, pp. 108-114, April 1991.   Abstract Link    Full Text

38.2.5    T. Shimizu, M. Shioya, "Characteristics of electric power transmission on high-frequency inverter having distributed constant line at load side," IEEE Trans. on Industrial Electronics, vol. 38, no. 2, pp. 115-120, April 1991.   Abstract Link    Full Text

38.2.6    S.K. Biswas, B. Basak, M.M. Swamy, "A three-phase half-controlled rectifier with pulse width modulation ," IEEE Trans. on Industrial Electronics, vol. 38, no. 2, pp. 121-125, April 1991.   Abstract Link    Full Text

38.2.7    R.J. King, "Analysis and design of an unusual unity-power-factor rectifier," IEEE Trans. on Industrial Electronics, vol. 38, no. 2, pp. 126-134, April 1991.   Abstract Link    Full Text

38.2.8    D. van der Linde, C.A.M. Boon, J.B. Klaassens, "Design of a high-frequency planar power transformer in multilayer technology," IEEE Trans. on Industrial Electronics, vol. 38, no. 2, pp. 135-141, April 1991.   Abstract Link    Full Text

38.2.9    W.E. Snyder, M.-L. Hsiao, K.J. Overton, K.E. Boone, "Circuit board inspection using a range camera," IEEE Trans. on Industrial Electronics, vol. 38, no. 2, pp. 142-149, April 1991.   Abstract Link    Full Text

38.2.10    M. Numao, S.-i. Morishita, "Cooperative scheduling and its application to steelmaking processes ," IEEE Trans. on Industrial Electronics, vol. 38, no. 2, pp. 150-155, April 1991.   Abstract Link    Full Text

IEEE Transactions on Industrial Electronics

  IEEE Transactions on Industrial Electronics 

Volume 38,  Number 3, June 1991           Access to the journal on IEEE XPLORE     IE Transactions Home Page



38.3.1    D. Antic, J. Holtz, "High-efficiency dual transistor base drive circuit based on the Cuk converter topology," IEEE Trans. on Industrial Electronics, vol. 38, no. 3, pp. 161-165, June 1991.   Abstract Link    Full Text

38.3.2    A. Ishiguro, T. Furuhashi, S. Okuma, "A novel control method for forced commutated cycloconverters using instantaneous values of input line-to-line voltages," IEEE Trans. on Industrial Electronics, vol. 38, no. 3, pp. 166-172, June 1991.   Abstract Link    Full Text

38.3.3    M.G. Kim, D.S. Lee, M.J. Youn, "A new state feedback control of resonant converters," IEEE Trans. on Industrial Electronics, vol. 38, no. 3, pp. 173-179, June 1991.   Abstract Link    Full Text

38.3.4    S. Iida, Y. Okuma, S. Masukawa, S. Miyairi, B.K. Bose, "Study on magnetic noise caused by harmonics in output voltages of PWM inverter," IEEE Trans. on Industrial Electronics, vol. 38, no. 3, pp. 180-186, June 1991.   Abstract Link    Full Text

38.3.5    Y. Shoji, M. Inaba, T. Fukuda, "Impact control of grasping [robot manipulators]," IEEE Trans. on Industrial Electronics, vol. 38, no. 3, pp. 187-194, June 1991.   Abstract Link    Full Text

38.3.6    T. Ozaki, T. Suzuki, T. Furuhashi, S. Okuma, Y. Uchikawa, "Trajectory control of robotic manipulators using neural networks ," IEEE Trans. on Industrial Electronics, vol. 38, no. 3, pp. 195-202, June 1991.   Abstract Link    Full Text

38.3.7    E.J. Dede, J.V. Gonzalez, J.A. Linares, J. Jordan, D. Ramirez, P. Rueda, "25-kW/50-kHz generator for induction heating," IEEE Trans. on Industrial Electronics, vol. 38, no. 3, pp. 203-209, June 1991.   Abstract Link    Full Text

38.3.8    G. Corriga, S. Sanna, G. Usai, "An optimal tandem active-passive suspension system for road vehicles with minimum power consumption," IEEE Trans. on Industrial Electronics, vol. 38, no. 3, pp. 210-216, June 1991.   Abstract Link    Full Text

38.3.9    M. Sunwoo, K.C. Cheok, N.J. Huang, "Model reference adaptive control for vehicle active suspension systems," IEEE Trans. on Industrial Electronics, vol. 38, no. 3, pp. 217-222, June 1991.   Abstract Link    Full Text

38.3.10    C. Umeagukwu, J. McCormick, "Investigation of an array technique for robotic seam tracking of weld joints," IEEE Trans. on Industrial Electronics, vol. 38, no. 3, pp. 223-229, June 1991.   Abstract Link    Full Text

IEEE Transactions on Industrial Electronics

  IEEE Transactions on Industrial Electronics 

Volume 38,  Number 4, August 1991           Access to the journal on IEEE XPLORE     IE Transactions Home Page



38.4.1    T.-H. Lee, K.-W. Lim, W.-C. Lai, "Real-time multivariable self-tuning controller using a feedforward paradigm with application to a coupled electric-drive pilot plant," IEEE Trans. on Industrial Electronics, vol. 38, no. 4, pp. 237-242, August 1991.   Abstract Link    Full Text

38.4.2    S.T. Hung, "Sensitivity points-based self-tuning," IEEE Trans. on Industrial Electronics, vol. 38, no. 4, pp. 243-250, August 1991.   Abstract Link    Full Text

38.4.3    A.K.S. Bhat, "A unified approach for the steady-state analysis of resonant converters," IEEE Trans. on Industrial Electronics, vol. 38, no. 4, pp. 251-259, August 1991.   Abstract Link    Full Text

38.4.4    J.G. Cho, G.H. Cho, "Single-cycle resonant converters: a new group of quasi-resonant converters suitable for high-performance DC/DC and AC/AC conversion applications," IEEE Trans. on Industrial Electronics, vol. 38, no. 4, pp. 260-267, August 1991.   Abstract Link    Full Text

38.4.5    B.T. Ooi, B.M.M. Mwinyiwiwa, X. Wang, G. Joos, "Operating limits of the current-regulated delta-modulated current-source PWM rectifier," IEEE Trans. on Industrial Electronics, vol. 38, no. 4, pp. 268-274, August 1991.   Abstract Link    Full Text

38.4.6    Chang-Ming Liaw, Ying-Shieh Kung, Ching-Ming Wu, "Design and implementation of a high-performance field-oriented induction motor drive," IEEE Trans. on Industrial Electronics, vol. 38, no. 4, pp. 275-282, August 1991.   Abstract Link    Full Text

38.4.7    H. Singh, S.M. Sharma, "Some novel μP-based configurations for controlling remotely located stepper motors as actuators of control valves," IEEE Trans. on Industrial Electronics, vol. 38, no. 4, pp. 283-287, August 1991.   Abstract Link    Full Text

38.4.8    A. Di Stefano, O. Mirabella, "Evaluating the field bus data link layer by a Petri net-based simulation," IEEE Trans. on Industrial Electronics, vol. 38, no. 4, pp. 288-297, August 1991.   Abstract Link    Full Text

38.4.9    H.-G. Yeh, "Processing performance of two Kalman filter algorithms with a DSP32C by using assembly and C languages," IEEE Trans. on Industrial Electronics, vol. 38, no. 4, pp. 298-302, August 1991.   Abstract Link    Full Text

38.4.10    Dong Seong Oh, Hwi Beom Shin, Myung Joong Youn, "A new slip gain adaptation algorithm for indirect field-oriented drive systems," IEEE Trans. on Industrial Electronics, vol. 38, no. 4, pp. 303-307, August 1991.   Abstract Link    Full Text

IEEE Transactions on Industrial Electronics

  IEEE Transactions on Industrial Electronics 

Volume 38,  Number 5, Oct 1991           Access to the journal on IEEE XPLORE     IE Transactions Home Page



38.5.1    G.S. Buja, M.I. Valla, "Control characteristics of the SRM drives. I. Operation in the linear region," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp. 313-321, Oct 1991.   Abstract Link    Full Text

38.5.2    A.M. Khambadkone, J. Holtz, "Vector-controlled induction motor drive with a self-commissioning scheme," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp. 322-327, Oct 1991.   Abstract Link    Full Text

38.5.3    N. Margaris, T. Goutas, Z. Doulgeri, A. Paschali, "Loss minimization in DC drives," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp. 328-336, Oct 1991.   Abstract Link    Full Text

38.5.4    E.-H. Song, B.-H. Kwon, "A direct digital control for the phase-controlled rectifier," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp. 337-343, Oct 1991.   Abstract Link    Full Text

38.5.5    M.K. Kazimierczuk, "Class D current-driven rectifiers for resonant DC/DC converter applications," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp. 344-354, Oct 1991.   Abstract Link    Full Text

38.5.6    H. Le-Huy, K. Slimani, P. Viarouge, "A current-controlled quasi-resonant converter for switched-reluctance motor," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp. 355-362, Oct 1991.   Abstract Link    Full Text

38.5.7    T. Umeno, Y. Hori, "Robust speed control of DC servomotors using modern two degrees-of-freedom controller design," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp. 363-368, Oct 1991.   Abstract Link    Full Text

38.5.8    M.R. Stojic, S.N. Vukosavic, "Design of microprocessor-based system for positioning servomechanism with induction motor," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp. 369-378, Oct 1991.   Abstract Link    Full Text

38.5.9    S. Shimada, S. Ugai, S. Sakamoto, A. Sase, Y. Shimizu, "Intelligent differential pressure transmitter with multiple sensor formed on a (110)-oriented circular silicon diaphragm," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp. 379-384, Oct 1991.   Abstract Link    Full Text

38.5.10    E. Faldella, G.C. Cardinali, P.U. Calzolari, "Architectural and design issues on optimal management of photovoltaic pumping systems," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp. 385-392, Oct 1991.   Abstract Link    Full Text

38.5.11    M.H. Ohsato, G. Kimura, M. Shioya, "Five-stepped PWM inverter used in photovoltaic systems," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp. 393-397, Oct 1991.   Abstract Link    Full Text

38.5.12    A. Patra, G.P. Rao, "Parameter estimation in a converter driven DC motor system via general hybrid orthogonal functions," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp. 398-403, Oct 1991.   Abstract Link    Full Text

38.5.13    G. Arsov, "A novel algorithm for microcomputer-based digitally controlled cycloconverter," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp. 404-405, Oct 1991.   Abstract Link    Full Text

IEEE Transactions on Industrial Electronics

  IEEE Transactions on Industrial Electronics 

Volume 38,  Number 6, Dec 1991           Access to the journal on IEEE XPLORE     IE Transactions Home Page



38.6.1    L. Zhou, G. Cook, "Path planning for robotic manipulators with redundant degrees of freedom," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp. 413-420, Dec 1991.   Abstract Link    Full Text

38.6.2    J.Y. Hung, "Control of industrial robots that have transmission elasticity," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp. 421-427, Dec 1991.   Abstract Link    Full Text

38.6.3    C.C. Hang, K.K. Sin, "On-line auto tuning of PID controllers based on the cross-correlation technique," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp. 428-437, Dec 1991.   Abstract Link    Full Text

38.6.4    A.C. Lippincott, R.M. Nelms, "A capacitor-charging power supply using a series-resonant topology, constant on-time/variable frequency control, and zero-current switching ," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp. 438-447, Dec 1991.   Abstract Link    Full Text

38.6.5    M.-y. Chow, P.M. Mangum, S.O. Yee, "A neural network approach to real-time condition monitoring of induction motors," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp. 448-453, Dec 1991.   Abstract Link    Full Text

38.6.6    K.-T. Chau, Y.-S. Lee, A. Ioinovici, "Computer-aided modeling of quasi-resonant converters in the presence of parasitic losses by using the MISSCO concept," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp. 454-461, Dec 1991.   Abstract Link    Full Text

38.6.7    C.Q. Lee, S. Sooksatra, "Performance characteristics of the full-bridge zero voltage switching PWM resonant converter," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp. 462-468, Dec 1991.   Abstract Link    Full Text

38.6.8    J.G. Kettleborough, I.R. Smith, V.V. Vadher, F.L.M. Antunes, "Microprocessor-based DC motor drive with spillover field weakening ," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp. 469-475, Dec 1991.   Abstract Link    Full Text

38.6.9    M. Prokin, "Speed measurement using the improved DMA transfer method," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp. 476-483, Dec 1991.   Abstract Link    Full Text

38.6.10    S. Seereeram, J.T.-Y. Wen, "An all-geodesic algorithm for filament winding of a T-shaped form ," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp. 484-490, Dec 1991.   Abstract Link    Full Text

38.6.11    Zhe Chen, "Local observability and its application to multiple measurement estimation," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp. 491-496, Dec 1991.   Abstract Link    Full Text

38.6.12    V.V. Bapeswara Rao, P. Enjetti, P.D. Ziogas, "Comment, with reply, on `Analysis of a static power converter under unbalance: a novel approach' by P. N. Enjeti and P.D. Ziogas," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp. 497-498, Dec 1991.   Abstract Link    Full Text

38.6.13    P.D. Olivier, "Feedback linearization of DC motors," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp. 498-501, Dec 1991.   Abstract Link    Full Text

38.6.14    D.C. Hanselman, "Techniques for improving resolver-to-digital conversion accuracy ," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp. 501-504, Dec 1991.   Abstract Link    Full Text