IEEE Transactions on Industrial Electronics 

Volume 35,  Number 1, Feb 1988           Access to the journal on IEEE XPLORE     IE Transactions Home Page



35.1.1    I.L. Erickson, "Implementing a carrier-band node using VLSI," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 1-5, Feb 1988.   Abstract Link    Full Text

35.1.2    H.A. Schutz, "The role of MAP in factory integration," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 6-12, Feb 1988.   Abstract Link    Full Text

35.1.3    A.C. Weaver, C.F. Summers, "The IEEE token bus-A performance bound on GM MAP," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 13-17, Feb 1988.   Abstract Link    Full Text

35.1.4    L. Ciminiera, C. Demartini, A. Valenzano, "Industrial IEEE 802.3 networks with short delivery time for urgent messages," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 18-25, Feb 1988.   Abstract Link    Full Text

35.1.5    R.C. Luo, "A microcomputer-based intelligent sensor for multiaxis force/torque measurement," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 26-30, Feb 1988.   Abstract Link    Full Text

35.1.6    K. Furuta, K. Kosuge, N. Mukai, "Control of articulated robot arm with sensory feedback: laser beam tracking system," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 31-39, Feb 1988.   Abstract Link    Full Text

35.1.7    M. Kabuka, J. Desoto, J. Miranda, "Robot vision tracking system," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 40-51, Feb 1988.   Abstract Link    Full Text

35.1.8    K. Furuta, M. Sampei, "Path control of a three-dimensional linear motional mechanical system using laser," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 52-59, Feb 1988.   Abstract Link    Full Text

35.1.9    A.M. Trzynadlowski, "Energy optimization of a certain class of incremental motion DC drives," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 60-66, Feb 1988.   Abstract Link    Full Text

35.1.10    P.P. Acarnley, A. Hughes, "Machine/drive circuit interactions in small variable-reluctance stepping and brushless DC motor systems," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 67-74, Feb 1988.   Abstract Link    Full Text

35.1.11    Z.K. Wu, E.G. Strangas, "Feed forward field orientation control of an induction motor using a PWM voltage source inverter and standardized single-board computers ," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 75-79, Feb 1988.   Abstract Link    Full Text

35.1.12    D.W.J. Pulle, A. Hughes, "High-speed performance of variable-reluctance stepmotors," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 80-84, Feb 1988.   Abstract Link    Full Text

35.1.13    G.C. Verghese, S.R. Sanders, "Observers for flux estimation in induction machines," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 85-94, Feb 1988.   Abstract Link    Full Text

35.1.14    K. Saito, K. Kamiyama, T. Ohmae, T. Matsuda, "A microprocessor-controlled speed regulator with instantaneous speed estimation for motor drives," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 95-99, Feb 1988.   Abstract Link    Full Text

35.1.15    H. Hanselmann, A. Engelke, "LQG-control of a highly resonant disk drive head positioning actuator," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 100-104, Feb 1988.   Abstract Link    Full Text

35.1.16    Y.-S. Li, T.Y. Young, J.A. Magerl, "Subpixel edge detection and estimation with a microprocessor-controlled line scan camera," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 105-112, Feb 1988.   Abstract Link    Full Text

35.1.17    W.K.N. Anakwa, M.N.S. Swamy, "Boiler plant control using a minimum order dynamic pole placement compensator," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 113-118, Feb 1988.   Abstract Link    Full Text

35.1.18    T. Fong-Chwee, H.R. Sirisena, "Self-tuning PID controllers for dead time processes," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 119-125, Feb 1988.   Abstract Link    Full Text

35.1.19    J. Tan, N. Kyriakopoulos, "Implementation of a tracking Kalman filter on a digital signal processor," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 126-134, Feb 1988.   Abstract Link    Full Text

35.1.20    G.A. Girgis, K. Horn, G. Kruse, "Measurement of mechanical vibrations using eddy current transducers and simple digital demodulating techniques," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 135-140, Feb 1988.   Abstract Link    Full Text

35.1.21    G.-H. Choe, M.-H. Park, "A new injection method for AC harmonic elimination by active power filter," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 141-147, Feb 1988.   Abstract Link    Full Text

35.1.22    Y.-S. Lee, Y.C. Cheng, "Computer-aided analysis of electronic DC-DC transformers," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 148-152, Feb 1988.   Abstract Link    Full Text

35.1.23    A.K.S. Bhat, S.B. Dewan, "A novel utility interfaced high-frequency link photovoltaic power conditioning system," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 153-159, Feb 1988.   Abstract Link    Full Text

35.1.24    B.K. Bose, "Technology trends in microcomputer control of electrical machines ," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 160-177, Feb 1988.   Abstract Link    Full Text

IEEE Transactions on Industrial Electronics

  IEEE Transactions on Industrial Electronics 

Volume 35,  Number 2, April 1988           Access to the journal on IEEE XPLORE     IE Transactions Home Page



35.2.1    M. Hirose, S. Matsushige, S. Buma, K. Kamiya, "Toyota electronic modulated air suspension system for the 1986 Soarer," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 193-200, April 1988.   Abstract Link    Full Text

35.2.2    T. Torii, S. Azuma, Y. Matsuzaki, "Multidisplay system [automobile displays]," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 201-207, April 1988.   Abstract Link    Full Text

35.2.3    M. Hirano, M. Takeuchi, T. Tomoda, K.-I. Nakano, "Keyless entry system with radio card transponder [automobiles]," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 208-216, April 1988.   Abstract Link    Full Text

35.2.4    M.R. Kabuka, P.N. Glaskowsky, J. Miranda, "Microcontroller-based architecture for control of a six joint robot arm," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 217-221, April 1988.   Abstract Link    Full Text

35.2.5    W.-K. Chung, H.S. Cho, "On the dynamic characteristics of a balance PUMA-760 robot," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 222-230, April 1988.   Abstract Link    Full Text

35.2.6    A.A. Goldenberg, L. Chan, "An approach to real-time control of robots in task space. Application to control of PUMA 560 without VAL-II," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 231-238, April 1988.   Abstract Link    Full Text

35.2.7    K.R. Davey, G.J. Vachtsevanos, R. Bass, G. Kelly, D. Ross, "Analysis and control of low-speed fractional horsepower synchronous drive motors," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 239-244, April 1988.   Abstract Link    Full Text

35.2.8    T.L. Laopoulos, C.A. Karybakas, "A phase locked motor speed control system with sample-and-hold phase detector," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 245-252, April 1988.   Abstract Link    Full Text

35.2.9    E.Y.Y. Ho, P.C. Sen, "Decoupling control of induction motor drives," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 253-262, April 1988.   Abstract Link    Full Text

35.2.10    H. Huisman, "A three-phase to three-phase series-resonant power converter with optimal input current waveforms. I. Control strategy," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 263-268, April 1988.   Abstract Link    Full Text

35.2.11    H. Huisman, "A three-phase to three-phase series-resonant power converter with optimal input current waveforms. II. Applications and results," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 269-277, April 1988.   Abstract Link    Full Text

35.2.12    S.F. Gorman, J.J. Cathey, J.A. Weimer, "A multi-microprocessor controller for a VV-VF cycloconverter-link brushless DC motor drive," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 278-283, April 1988.   Abstract Link    Full Text

35.2.13    J.-Y. Lee, Y.-Y. Sun, "Novel sinusoidal pulsewidth modulation schemes for voltage-source inverters with fluctuating input voltage," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 284-294, April 1988.   Abstract Link    Full Text

35.2.14    A. Kawamura, R. Chuarayapratip, T. Haneyoshi, "Deadbeat control of PWM inverter with modified pulse patterns for uninterruptible power supply," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 295-300, April 1988.   Abstract Link    Full Text

35.2.15    A. Barili, A. Brambilla, G. Cottafava, E. Dallago, "A simulation model for the saturable reactor," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 301-306, April 1988.   Abstract Link    Full Text

35.2.16    I. Maric, "Automatic digital correction of measurement data based on M-point autocalibration and inverse polynomial approximation ," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 317-322, April 1988.   Abstract Link    Full Text

35.2.17    H.-H. Loh, J.-G. Leu, R.C. Luo, "The analysis of natural textures using run length features," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 323-328, April 1988.   Abstract Link    Full Text

35.2.18    R.A.M. Browne, S.W.H. De Haan, J.B. Klaassens, J.D. Lodder, D.J. Verheul, "Computer-aided design of toroidal air-core inductors for high energy levels," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 329-337, April 1988.   Abstract Link    Full Text

35.2.19    C.F. Christiansen, J.L. Herrada, M.I. Valla, N.H. Martinez, "Further improvements in a three-phase sine wave generator," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 338-339, April 1988.   Abstract Link    Full Text

35.2.20    P.S.M. Chin, "Comments on `Stability analysis, design, and simulation of a closed-loop converter-controlled DC drive' by P.B. Anjaneyulu, et al," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 339-341, April 1988.   Abstract Link    Full Text

35.2.21    A.A. El-Amawy, A. Mirbod, "An efficient software-controlled PLL for low-frequency applications ," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 341-344, April 1988.   Abstract Link    Full Text

35.2.22    L. Ciminiera, A. Valenzano, "Acknowledgement and priority mechanisms in the 802.4 token-bus," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 307-316, April 1988.   Abstract Link    Full Text

IEEE Transactions on Industrial Electronics

  IEEE Transactions on Industrial Electronics 

Volume 35,  Number 3, June 1988           Access to the journal on IEEE XPLORE     IE Transactions Home Page



35.3.1    J.H. Peden, A.C. Weaver, "Are priorities useful in an 802.5 token ring?," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 361-365, June 1988.   Abstract Link    Full Text

35.3.2    R.M. Gorur, A.C. Weaver, "Setting target rotation times in an IEEE token bus network," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 366-371, June 1988.   Abstract Link    Full Text

35.3.3    W. Gora, U. Herzog, S.K. Tripathi, "Clock synchronization on the factory floor (FMS)," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 372-380, June 1988.   Abstract Link    Full Text

35.3.4    S.K. Dean, R.J.F. Dow, "A versatile controller for 3-D machining," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 381-386, June 1988.   Abstract Link    Full Text

35.3.5    K.S.M. Panicker, S.I. Ahson, C.M. Bhatia, "Microprocessor-based sliding mode controller for a micromachine," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 387-392, June 1988.   Abstract Link    Full Text

35.3.6    C.-M. Liaw, C.-T. Pan, Y.-C. Chen, "Design and implementation of an adaptive controller for current-fed induction motor," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 393-401, June 1988.   Abstract Link    Full Text

35.3.7    R.C. Becerra, M. Ehsani, "High-speed torque control of brushless permanent magnet motors," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 402-406, June 1988.   Abstract Link    Full Text

35.3.8    K.F. Teng, R.W. Vest, "A microprocessor-controlled ink jet printing system for electronic circuits," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 407-412, June 1988.   Abstract Link    Full Text

35.3.9    H.-Y. Chung, Y.-Y. Sun, "Parameter identification of linear distributed systems via Taylor operational matrix," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 413-416, June 1988.   Abstract Link    Full Text

35.3.10    P.C. Baracos, R.D. Hudson, L.J. Vroomen, P.J.A. Zsombor-Murray, "Advances in binary decision based programmable controllers," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 417-425, June 1988.   Abstract Link    Full Text

35.3.11    E.M. Thomson, P.J. Medelius, M.A. Uman, "A remote sensor for the three components of transient electric fields," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 426-433, June 1988.   Abstract Link    Full Text

35.3.12    A.K. Chattopadhyay, N. Mether, "A generalized approach to steady-state analysis of a current-source inverter with induction motor load including commutation overlap," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 434-441, June 1988.   Abstract Link    Full Text

35.3.13    A. Khoei, S. Yuvarajan, "Single-phase AC-AC converters using power MOSFETs," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 442-443, June 1988.   Abstract Link    Full Text

35.3.14    P.G. Maranesi, V. Tavazzi, V. Varoli, "Two-part characterization of PWM voltage regulators at low frequencies," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 444-450, June 1988.   Abstract Link    Full Text

35.3.15    J.-P. Vandelac, P.D. Ziogas, "A DC to DC PWM series resonant converter operated at resonant frequency," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 451-460, June 1988.   Abstract Link    Full Text

35.3.16    A.R. Prasad, P.D. Ziogas, S. Manias, "A comparative evaluation of SMR converters with and without active input current waveshaping," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 461-468, June 1988.   Abstract Link    Full Text

35.3.17    L.W. Tao, C.Z. Fang, "State estimation of output-decoupled complex systems with application to fluid pipeline," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 469-475, June 1988.   Abstract Link    Full Text

35.3.18    P.S. Rao, V. Ramachandran, "Evaluation of performance criteria of the CSI-IM drive system," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 476-478, June 1988.   Abstract Link    Full Text

IEEE Transactions on Industrial Electronics

  IEEE Transactions on Industrial Electronics 

Volume 35,  Number 4, August 1988           Access to the journal on IEEE XPLORE     IE Transactions Home Page



35.4.1    A. Moghaddamjoo, "Step-like signal processing with distinct finite number of levels ," IEEE Trans. on Industrial Electronics, vol. 35, no. 4, pp. 489-493, August 1988.   Abstract Link    Full Text

35.4.2    A.K.S. Bhat, "Analysis and design of a DC/DC converter using square-wave output resonant inverter," IEEE Trans. on Industrial Electronics, vol. 35, no. 4, pp. 494-501, August 1988.   Abstract Link    Full Text

35.4.3    C.F. Christiansen, M.I. Valla, C.H. Rivetta, "A synchronization technique for static delta-modulated PWM inverters," IEEE Trans. on Industrial Electronics, vol. 35, no. 4, pp. 502-507, August 1988.   Abstract Link    Full Text

35.4.4    J.W. Dixon, Boon-Teck Ooi, "Indirect current control of a unity power factor sinusoidal current boost type three-phase rectifier," IEEE Trans. on Industrial Electronics, vol. 35, no. 4, pp. 508-515, August 1988.   Abstract Link    Full Text

35.4.5    Tian-Hua Liu, Chung-Ming Young, Chang-Huan Liu, "Microprocessor-based controller design and simulation for a permanent magnet synchronous motor drive," IEEE Trans. on Industrial Electronics, vol. 35, no. 4, pp. 516-523, August 1988.   Abstract Link    Full Text

35.4.6    R.M. Davis, "A comparison of switched reluctance rotor structures," IEEE Trans. on Industrial Electronics, vol. 35, no. 4, pp. 524-529, August 1988.   Abstract Link    Full Text

35.4.7    G.K. Dubey, "Analysis of DC drive fed by single-phase half-controlled converters in sequence control," IEEE Trans. on Industrial Electronics, vol. 35, no. 4, pp. 530-536, August 1988.   Abstract Link    Full Text

35.4.8    P. Pillay, R. Krishnan, "Modeling of permanent magnet motor drives," IEEE Trans. on Industrial Electronics, vol. 35, no. 4, pp. 537-541, August 1988.   Abstract Link    Full Text

35.4.9    M.F. Rahman, Aun-Neow Poo, "An application oriented test procedure for designing microstepping step motor controllers," IEEE Trans. on Industrial Electronics, vol. 35, no. 4, pp. 542-546, August 1988.   Abstract Link    Full Text

35.4.10    B.K. Bose, P.M. Szczesny, "A microcomputer-based control and simulation of an advanced IPM synchronous machine drive system for electric vehicle propulsion," IEEE Trans. on Industrial Electronics, vol. 35, no. 4, pp. 547-559, August 1988.   Abstract Link    Full Text

35.4.11    R. Krishnan, A.S. Bharadwaj, P.N. Materu, "Computer-aided design of electrical machines for variable speed applications," IEEE Trans. on Industrial Electronics, vol. 35, no. 4, pp. 560-571, August 1988.   Abstract Link    Full Text

35.4.12    D. Ciscato, A. Fehl, L. Turolla, "Microstep control of floppy disk drive," IEEE Trans. on Industrial Electronics, vol. 35, no. 4, pp. 572-575, August 1988.   Abstract Link    Full Text

IEEE Transactions on Industrial Electronics

  IEEE Transactions on Industrial Electronics 

Volume 35,  Number 5, Oct 1988           Access to the journal on IEEE XPLORE     IE Transactions Home Page



IEEE Transactions on Industrial Electronics

  IEEE Transactions on Industrial Electronics 

Volume 35,  Number 6, Dec 1988           Access to the journal on IEEE XPLORE     IE Transactions Home Page